BOPAlgo_MakeConnected is the algorithm for making the touching shapes connected or glued, i.e. for making the coinciding geometries be topologically shared among the shapes. More...

#include <BOPAlgo_MakeConnected.hxx>

Inheritance diagram for BOPAlgo_MakeConnected:

[legend]

Public Member Functions

Constructor

Empty constructor

BOPAlgo_MakeConnected ()=default

Setters for the shapes to make connected

Sets the shape for making them connected.

Parameters

[in] theArgs The arguments for the operation.

void SetArguments (const NCollection_List< TopoDS_Shape > &theArgs)

Adds the shape to the arguments.

void AddArgument (const TopoDS_Shape &theS)

Adds the shape to the arguments.

const NCollection_List< TopoDS_Shape > & Arguments () const

Returns the list of arguments of the operation.

Performing the operations

Performs the operation, i.e. makes the input shapes connected.

void Perform ()

Shape periodicity & repetition

Makes the connected shape periodic. Repeated calls of this method overwrite the previous calls working with the basis connected shape.

Parameters

[in] theParams Periodic options.

void MakePeriodic (const BOPAlgo_MakePeriodic::PeriodicityParams &theParams)

Performs repetition of the periodic shape in specified direction required number of times.

void RepeatShape (const int theDirectionID, const int theTimes)

Performs repetition of the periodic shape in specified direction required number of times.

void ClearRepetitions ()

Clears the repetitions performed on the periodic shape, keeping the shape periodic.

const BOPAlgo_MakePeriodic & PeriodicityTool () const

Returns the periodicity tool.

Material transitions

Returns the original shapes which images contain the the given shape with FORWARD orientation.

Parameters

[in] theS The shape for which the materials are necessary.

const NCollection_List< TopoDS_Shape > & MaterialsOnPositiveSide (const TopoDS_Shape &theS)

Returns the original shapes which images contain the the given shape with REVERSED orientation.

const NCollection_List< TopoDS_Shape > & MaterialsOnNegativeSide (const TopoDS_Shape &theS)

Returns the original shapes which images contain the the given shape with REVERSED orientation.

History methods

Returns the history of operations

const occ::handle< BRepTools_History > & History () const

Returns the list of shapes modified from the given shape.

const NCollection_List< TopoDS_Shape > & GetModified (const TopoDS_Shape &theS)

Returns the list of shapes modified from the given shape.

const NCollection_List< TopoDS_Shape > & GetOrigins (const TopoDS_Shape &theS)

Returns the list of original shapes from which the current shape has been created.

Getting the result shapes

Returns the resulting connected shape

const TopoDS_Shape & Shape () const

Returns the resulting periodic & repeated shape.

const TopoDS_Shape & PeriodicShape () const

Returns the resulting periodic & repeated shape.

Clearing the contents of the algorithm from previous runs

Clears the contents of the algorithm.

void Clear () override

Clears all warnings and errors, and any data cached by the algorithm. User defined options are not cleared.

Public Member Functions inherited from BOPAlgo_Options

BOPAlgo_Options ()

Empty constructor.

BOPAlgo_Options (const occ::handle< NCollection_BaseAllocator > &theAllocator)

Constructor with allocator.

virtual ~BOPAlgo_Options ()

Destructor.

const occ::handle< NCollection_BaseAllocator > & Allocator () const

Returns allocator.

void AddError (const occ::handle< Message_Alert > &theAlert)

Adds the alert as error (fail).

void AddWarning (const occ::handle< Message_Alert > &theAlert)

Adds the alert as warning.

bool HasErrors () const

Returns true if algorithm has failed.

bool HasError (const occ::handle< Standard_Type > &theType) const

Returns true if algorithm has generated error of specified type.

bool HasWarnings () const

Returns true if algorithm has generated some warning alerts.

bool HasWarning (const occ::handle< Standard_Type > &theType) const

Returns true if algorithm has generated warning of specified type.

const occ::handle< Message_Report > & GetReport () const

Returns report collecting all errors and warnings.

void DumpErrors (Standard_OStream &theOS) const

Dumps the error status into the given stream.

void DumpWarnings (Standard_OStream &theOS) const

Dumps the warning statuses into the given stream.

void ClearWarnings ()

Clears the warnings of the algorithm.

void SetFuzzyValue (const double theFuzz)

Sets the additional tolerance.

double FuzzyValue () const

Returns the additional tolerance.

void SetUseOBB (const bool theUseOBB)

Enables/Disables the usage of OBB.

bool UseOBB () const

Returns the flag defining usage of OBB.

void SetRunParallel (const bool theFlag)

Set the flag of parallel processing if <theFlag> is true the parallel processing is switched on if <theFlag> is false the parallel processing is switched off.

bool RunParallel () const

Returns the flag of parallel processing.

Protected Attributes
Fields
NCollection_List< TopoDS_Shape >	myArguments
	Input shapes for making them connected.
NCollection_IndexedMap< TopoDS_Shape, TopTools_ShapeMapHasher >	myAllInputsMap
	Map of all BRep sub-elements of the input shapes.
BOPAlgo_MakePeriodic	myPeriodicityMaker
	Tool for making the shape periodic.
NCollection_DataMap< TopoDS_Shape, NCollection_List< TopoDS_Shape > >	myMaterials
	Map of the materials associations for the border elements.
NCollection_DataMap< TopoDS_Shape, NCollection_List< TopoDS_Shape >, TopTools_ShapeMapHasher >	myOrigins
	Map of origins (allows tracking the shape's ancestors).
occ::handle< BRepTools_History >	myGlueHistory
	Gluing History.
occ::handle< BRepTools_History >	myHistory
	Final History of shapes modifications (including making the shape periodic and repetitions).
TopoDS_Shape	myGlued
	The resulting connected (glued) shape.
TopoDS_Shape	myShape
	The resulting shape.
occ::handle< NCollection_BaseAllocator >	myAllocator
	Enables/Disables the usage of OBB.
occ::handle< Message_Report >	myReport
	Enables/Disables the usage of OBB.
bool	myRunParallel
	Enables/Disables the usage of OBB.
double	myFuzzyValue
	Enables/Disables the usage of OBB.
bool	myUseOBB
	Enables/Disables the usage of OBB.

Protected methods performing the operation
Checks the validity of input data.
void	CheckData ()
	Makes the argument shapes connected (or glued).
void	MakeConnected ()
	Makes the argument shapes connected (or glued).
void	AssociateMaterials ()
	Associates the materials transitions for the border elements:
void	FillOrigins ()
	Fills the map of origins.
void	Update ()
	Updates the history, material associations, origins map after periodicity operations.

Additional Inherited Members
static bool	GetParallelMode ()
	Gets the global parallel mode.
static void	SetParallelMode (const bool theNewMode)
	Sets the global parallel mode.
bool	UserBreak (const Message_ProgressScope &thePS)
	Adds error to the report if the break signal was caught. Returns true in this case, false otherwise.

Detailed Description

BOPAlgo_MakeConnected is the algorithm for making the touching shapes connected or glued, i.e. for making the coinciding geometries be topologically shared among the shapes.

The input shapes should be of the same dimension, otherwise the gluing will not make any sense.

After the shapes are made connected, the border elements of input shapes are associated with the shapes to which they belong. At that, the orientation of the border element in the shape is taken into account. The associations are made for the following types:

For input SOLIDS, the resulting FACES are associated with the input solids;
For input FACES, the resulting EDGES are associated with the input faces;
For input EDGES, the resulting VERTICES are associated with the input edges.

In frames of this algorithm the input shapes are called materials, and the association process is called the material association. The material association allows finding the coinciding elements for the opposite input shapes. These elements will be associated to at least two materials.

After making the shapes connected, it is possible to make the connected shape periodic using the BOPAlgo_MakePeriodic tool. After making the shape periodic, the material associations will be updated to correspond to the actual state of the result shape. Repetition of the periodic shape is also possible here. Material associations are not going to be lost.

The algorithm supports history of shapes modification, thus it is possible to track the modification of the input shapes during the operations. Additionally to standard history methods, the algorithm provides the the method GetOrigins() which allows obtaining the input shapes from which the resulting shape has been created.

The algorithm supports the parallel processing mode, which allows faster completion of the operations.

The algorithm returns the following Error/Warning messages:

BOPAlgo_AlertTooFewArguments - error alert is given on the attempt to run the algorithm without the arguments;
BOPAlgo_AlertMultiDimensionalArguments - error alert is given on the attempt to run the algorithm on multi-dimensional arguments;
BOPAlgo_AlertUnableToGlue - error alert is given if the gluer algorithm is unable to glue the given arguments;
BOPAlgo_AlertUnableToMakePeriodic - warning alert is given if the periodicity maker is unable to make the connected shape periodic with given options;
BOPAlgo_AlertShapeIsNotPeriodic - warning alert is given on the attempt to repeat the shape before making it periodic.

Here is the example of usage of the algorithm:

NCollection_List<TopoDS_Shape> anArguments = ...;  // Shapes to make connected
bool bRunParallel = ...;     // Parallel processing mode
 
BOPAlgo_MakeConnected aMC;               // Tool for making the shapes connected
aMC.SetArguments(anArguments);           // Set the shapes
aMC.SetRunParallel(bRunParallel);        // Set parallel processing mode
aMC.Perform();                           // Perform the operation
 
if (aMC.HasErrors())                     // Check for the errors
{
  // errors treatment
  Standard_SStream aSStream;
  aMC.DumpErrors(aSStream);
  return;
}
if (aMC.HasWarnings())                   // Check for the warnings
{
  // warnings treatment
  Standard_SStream aSStream;
  aMC.DumpWarnings(aSStream);
}
 
const TopoDS_Shape& aGluedShape = aMC.Shape(); // Connected shape
 
// Checking material associations
TopAbs_ShapeEnum anElemType = ...;       // Type of border element
TopExp_Explorer anExp(anArguments.First(), anElemType);
for (; anExp.More(); anExp.Next())
{
  const TopoDS_Shape& anElement = anExp.Current();
  const NCollection_List<TopoDS_Shape>& aNegativeM = aMC.MaterialsOnNegativeSide(anElement);
  const NCollection_List<TopoDS_Shape>& aPositiveM = aMC.MaterialsOnPositiveSide(anElement);
}
 
// Making the connected shape periodic
BOPAlgo_MakePeriodic::PeriodicityParams aParams = ...; // Options for periodicity of the
connected shape aMC.MakePeriodic(aParams);
 
// Shape repetition after making it periodic
// Check if the shape has been made periodic successfully
if (aMC.PeriodicityTool().HasErrors())
{
  // Periodicity maker error treatment
}
 
// Shape repetition in periodic directions
aMC.RepeatShape(0, 2);
 
const TopoDS_Shape& aShape = aMC.PeriodicShape(); // Periodic and repeated shape

Constructor & Destructor Documentation

◆ BOPAlgo_MakeConnected()

BOPAlgo_MakeConnected::BOPAlgo_MakeConnected ( )

default

Member Function Documentation

◆ AddArgument()

void BOPAlgo_MakeConnected::AddArgument ( const TopoDS_Shape & theS )

inline

Adds the shape to the arguments.

Parameters

[in] theS One of the argument shapes.

◆ Arguments()

const NCollection_List< TopoDS_Shape > & BOPAlgo_MakeConnected::Arguments ( ) const

inline

Returns the list of arguments of the operation.

◆ AssociateMaterials()

void BOPAlgo_MakeConnected::AssociateMaterials ( )

protected

Associates the materials transitions for the border elements:

For input Solids, associates the Faces to Solids;
For input Faces, associates the Edges to Faces;
For input Edges, associates the Vertices to Edges.

◆ CheckData()

void BOPAlgo_MakeConnected::CheckData ( )

protected

Makes the argument shapes connected (or glued).

◆ Clear()

void BOPAlgo_MakeConnected::Clear ( )

inlineoverridevirtual

Clears all warnings and errors, and any data cached by the algorithm. User defined options are not cleared.

Reimplemented from BOPAlgo_Options.

◆ ClearRepetitions()

void BOPAlgo_MakeConnected::ClearRepetitions ( )

Clears the repetitions performed on the periodic shape, keeping the shape periodic.

◆ FillOrigins()

void BOPAlgo_MakeConnected::FillOrigins ( )

protected

Fills the map of origins.

◆ GetModified()

const NCollection_List< TopoDS_Shape > & BOPAlgo_MakeConnected::GetModified ( const TopoDS_Shape & theS )

inline

Returns the list of shapes modified from the given shape.

Parameters

[in] theS The shape for which the modified shapes are necessary.

◆ GetOrigins()

const NCollection_List< TopoDS_Shape > & BOPAlgo_MakeConnected::GetOrigins ( const TopoDS_Shape & theS )

inline

Returns the list of original shapes from which the current shape has been created.

Parameters

[in] theS The shape for which the origins are necessary.

◆ History()

const occ::handle< BRepTools_History > & BOPAlgo_MakeConnected::History ( ) const

inline

Returns the list of shapes modified from the given shape.

Parameters

[in] theS The shape for which the modified shapes are necessary.

◆ MakeConnected()

void BOPAlgo_MakeConnected::MakeConnected ( )

protected

Makes the argument shapes connected (or glued).

◆ MakePeriodic()

void BOPAlgo_MakeConnected::MakePeriodic ( const BOPAlgo_MakePeriodic::PeriodicityParams & theParams )

Performs repetition of the periodic shape in specified direction required number of times.

Parameters

[in]	theDirectionID	The direction's ID (0 for X, 1 for Y, 2 for Z);
[in]	theTimes	Requested number of repetitions (sign of the value defines the side of the repetition direction (positive or negative)).

◆ MaterialsOnNegativeSide()

const NCollection_List< TopoDS_Shape > & BOPAlgo_MakeConnected::MaterialsOnNegativeSide ( const TopoDS_Shape & theS )

inline

Returns the original shapes which images contain the the given shape with REVERSED orientation.

Parameters

[in] theS The shape for which the materials are necessary.

◆ MaterialsOnPositiveSide()

const NCollection_List< TopoDS_Shape > & BOPAlgo_MakeConnected::MaterialsOnPositiveSide ( const TopoDS_Shape & theS )

inline

Returns the original shapes which images contain the the given shape with REVERSED orientation.

Parameters

[in] theS The shape for which the materials are necessary.

◆ Perform()

void BOPAlgo_MakeConnected::Perform ( )

◆ PeriodicityTool()

const BOPAlgo_MakePeriodic & BOPAlgo_MakeConnected::PeriodicityTool ( ) const

inline

Returns the periodicity tool.

◆ PeriodicShape()

const TopoDS_Shape & BOPAlgo_MakeConnected::PeriodicShape ( ) const

inline

Returns the resulting periodic & repeated shape.

◆ RepeatShape()

void BOPAlgo_MakeConnected::RepeatShape	(	const int	theDirectionID,
		const int	theTimes )

Performs repetition of the periodic shape in specified direction required number of times.

Parameters

[in]	theDirectionID	The direction's ID (0 for X, 1 for Y, 2 for Z);
[in]	theTimes	Requested number of repetitions (sign of the value defines the side of the repetition direction (positive or negative)).

◆ SetArguments()

void BOPAlgo_MakeConnected::SetArguments ( const NCollection_List< TopoDS_Shape > & theArgs )

inline

Adds the shape to the arguments.

Parameters

[in] theS One of the argument shapes.

◆ Shape()

const TopoDS_Shape & BOPAlgo_MakeConnected::Shape ( ) const

inline

Returns the resulting periodic & repeated shape.

◆ Update()

void BOPAlgo_MakeConnected::Update ( )

protected

Updates the history, material associations, origins map after periodicity operations.

Field Documentation

◆ myAllInputsMap

NCollection_IndexedMap<TopoDS_Shape, TopTools_ShapeMapHasher> BOPAlgo_MakeConnected::myAllInputsMap

protected

Map of all BRep sub-elements of the input shapes.

◆ myArguments

NCollection_List<TopoDS_Shape> BOPAlgo_MakeConnected::myArguments

protected

Input shapes for making them connected.

◆ myGlued

TopoDS_Shape BOPAlgo_MakeConnected::myGlued

protected

The resulting connected (glued) shape.

◆ myGlueHistory

occ::handle<BRepTools_History> BOPAlgo_MakeConnected::myGlueHistory

protected

Gluing History.

◆ myHistory

occ::handle<BRepTools_History> BOPAlgo_MakeConnected::myHistory

protected

Final History of shapes modifications (including making the shape periodic and repetitions).

◆ myMaterials

NCollection_DataMap<TopoDS_Shape, NCollection_List<TopoDS_Shape> > BOPAlgo_MakeConnected::myMaterials

protected

Map of the materials associations for the border elements.

◆ myOrigins

NCollection_DataMap<TopoDS_Shape, NCollection_List<TopoDS_Shape>, TopTools_ShapeMapHasher> BOPAlgo_MakeConnected::myOrigins

protected

Map of origins (allows tracking the shape's ancestors).

◆ myPeriodicityMaker

BOPAlgo_MakePeriodic BOPAlgo_MakeConnected::myPeriodicityMaker

protected

Tool for making the shape periodic.

◆ myShape

TopoDS_Shape BOPAlgo_MakeConnected::myShape

protected

The resulting shape.

The documentation for this class was generated from the following file:

BOPAlgo_MakeConnected.hxx

Public Member Functions

Protected Attributes

Protected methods performing the operation

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ BOPAlgo_MakeConnected()

Member Function Documentation

◆ AddArgument()

◆ Arguments()

◆ AssociateMaterials()

◆ CheckData()

◆ Clear()

◆ ClearRepetitions()

◆ FillOrigins()

◆ GetModified()

◆ GetOrigins()

◆ History()

◆ MakeConnected()

◆ MakePeriodic()

◆ MaterialsOnNegativeSide()

◆ MaterialsOnPositiveSide()

◆ Perform()

◆ PeriodicityTool()

◆ PeriodicShape()

◆ RepeatShape()

◆ SetArguments()

◆ Shape()

◆ Update()

Field Documentation

◆ myAllInputsMap

◆ myArguments

◆ myGlued

◆ myGlueHistory

◆ myHistory

◆ myMaterials

◆ myOrigins

◆ myPeriodicityMaker

◆ myShape