BiTgte_Blend Class Reference

Root class. More...

#include <BiTgte_Blend.hxx>

Public Member Functions
	BiTgte_Blend ()
	BiTgte_Blend (const TopoDS_Shape &S, const double Radius, const double Tol, const bool NUBS)
	: Shape to be rounded <Radius>: radius of the fillet <Tol>: Tol3d used in approximations <NUBS>: if true, generate only NUBS surfaces, if false, generate analytical surfaces if possible
void	Init (const TopoDS_Shape &S, const double Radius, const double Tol, const bool NUBS)
void	Clear ()
	Clear all the Fields.
void	SetFaces (const TopoDS_Face &F1, const TopoDS_Face &F2)
	Set two faces of <myShape> on which the Sphere must roll.
void	SetEdge (const TopoDS_Edge &Edge)
	Set an edge of <myShape> to be rounded.
void	SetStoppingFace (const TopoDS_Face &Face)
	Set a face on which the fillet must stop.
void	Perform (const bool BuildShape=true)
	Compute the generated surfaces. If <BuildShape> is true, compute the resulting Shape. If false, only the blending surfaces are computed.
bool	IsDone () const
const TopoDS_Shape &	Shape () const
	returns the result
int	NbSurfaces () const
	returns the Number of generated surfaces.
occ::handle< Geom_Surface >	Surface (const int Index) const
	returns the surface of range Index
const TopoDS_Face &	Face (const int Index) const
	returns the surface of range Index
void	CenterLines (NCollection_List< TopoDS_Shape > &LC) const
	set in <LC> all the center lines
occ::handle< Geom_Surface >	Surface (const TopoDS_Shape &CenterLine) const
	returns the surface generated by the centerline. <CenterLine> may be
const TopoDS_Face &	Face (const TopoDS_Shape &CenterLine) const
	returns the face generated by the centerline. <CenterLine> may be
BiTgte_ContactType	ContactType (const int Index) const
	returns the type of contact
const TopoDS_Shape &	SupportShape1 (const int Index) const
	gives the first support shape relative to SurfaceFillet(Index);
const TopoDS_Shape &	SupportShape2 (const int Index) const
	gives the second support shape relative to SurfaceFillet(Index);
occ::handle< Geom_Curve >	CurveOnShape1 (const int Index) const
	gives the 3d curve of SurfaceFillet(Index) on SupportShape1(Index)
occ::handle< Geom_Curve >	CurveOnShape2 (const int Index) const
	gives the 3d curve of SurfaceFillet(Index) on SupportShape2(Index)
occ::handle< Geom2d_Curve >	PCurveOnFace1 (const int Index) const
	gives the PCurve associated to CurvOnShape1(Index) on the support face Warning: returns a Null Handle if SupportShape1 is not a Face
occ::handle< Geom2d_Curve >	PCurve1OnFillet (const int Index) const
	gives the PCurve associated to CurveOnShape1(Index) on the Fillet
occ::handle< Geom2d_Curve >	PCurveOnFace2 (const int Index) const
	gives the PCurve associated to CurveOnShape2(Index) on the support face Warning: returns a Null Handle if SupportShape2 is not a Face
occ::handle< Geom2d_Curve >	PCurve2OnFillet (const int Index) const
	gives the PCurve associated to CurveOnShape2(Index) on the fillet
int	NbBranches ()
void	IndicesOfBranche (const int Index, int &From, int &To) const
	Set in <From>,<To> the indices of the faces of the branche <Index>.
void	ComputeCenters ()
	Computes the center lines.

Detailed Description

Root class.

Constructor & Destructor Documentation

BiTgte_Blend() [1/2]

BiTgte_Blend::BiTgte_Blend

(

)

BiTgte_Blend() [2/2]

BiTgte_Blend::BiTgte_Blend	(	const TopoDS_Shape &	S,
		const double	Radius,
		const double	Tol,
		const bool	NUBS )

: Shape to be rounded <Radius>: radius of the fillet <Tol>: Tol3d used in approximations <NUBS>: if true, generate only NUBS surfaces, if false, generate analytical surfaces if possible

Member Function Documentation

CenterLines()

void BiTgte_Blend::CenterLines

(

NCollection_List< TopoDS_Shape > &

LC

)

const

set in <LC> all the center lines

Clear()

void BiTgte_Blend::Clear

(

)

Clear all the Fields.

ComputeCenters()

void BiTgte_Blend::ComputeCenters

(

)

Computes the center lines.

ContactType()

BiTgte_ContactType BiTgte_Blend::ContactType

(

const int

Index

)

const

returns the type of contact

CurveOnShape1()

occ::handle< Geom_Curve > BiTgte_Blend::CurveOnShape1

(

const int

Index

)

const

gives the 3d curve of SurfaceFillet(Index) on SupportShape1(Index)

CurveOnShape2()

occ::handle< Geom_Curve > BiTgte_Blend::CurveOnShape2

(

const int

Index

)

const

gives the 3d curve of SurfaceFillet(Index) on SupportShape2(Index)

Face() [1/2]

const TopoDS_Face & BiTgte_Blend::Face

(

const int

Index

)

const

returns the surface of range Index

Face() [2/2]

const TopoDS_Face & BiTgte_Blend::Face

(

const TopoDS_Shape &

CenterLine

)

const

returns the face generated by the centerline. <CenterLine> may be

• an edge : generate a pipe.
• a vertex : generate a sphere. Warning: returns a Null Shape if <CenterLine> generates no surface.

IndicesOfBranche()

void BiTgte_Blend::IndicesOfBranche	(	const int	Index,
		int &	From,
		int &	To ) const

Set in <From>,<To> the indices of the faces of the branche <Index>.

i.e: Branche<Index> = Face(From) + Face(From+1) + ..+ Face(To)

Init()

void BiTgte_Blend::Init	(	const TopoDS_Shape &	S,
		const double	Radius,
		const double	Tol,
		const bool	NUBS )

IsDone()

bool BiTgte_Blend::IsDone

(

)

const

NbBranches()

int BiTgte_Blend::NbBranches

(

)

NbSurfaces()

int BiTgte_Blend::NbSurfaces

(

)

const

returns the Number of generated surfaces.

PCurve1OnFillet()

occ::handle< Geom2d_Curve > BiTgte_Blend::PCurve1OnFillet

(

const int

Index

)

const

gives the PCurve associated to CurveOnShape1(Index) on the Fillet

PCurve2OnFillet()

occ::handle< Geom2d_Curve > BiTgte_Blend::PCurve2OnFillet

(

const int

Index

)

const

gives the PCurve associated to CurveOnShape2(Index) on the fillet

PCurveOnFace1()

occ::handle< Geom2d_Curve > BiTgte_Blend::PCurveOnFace1

(

const int

Index

)

const

gives the PCurve associated to CurvOnShape1(Index) on the support face Warning: returns a Null Handle if SupportShape1 is not a Face

PCurveOnFace2()

occ::handle< Geom2d_Curve > BiTgte_Blend::PCurveOnFace2

(

const int

Index

)

const

gives the PCurve associated to CurveOnShape2(Index) on the support face Warning: returns a Null Handle if SupportShape2 is not a Face

Perform()

void BiTgte_Blend::Perform

(

const bool

BuildShape = true

)

Compute the generated surfaces. If <BuildShape> is true, compute the resulting Shape. If false, only the blending surfaces are computed.

SetEdge()

void BiTgte_Blend::SetEdge

(

const TopoDS_Edge &

Edge

)

Set an edge of <myShape> to be rounded.

SetFaces()

void BiTgte_Blend::SetFaces	(	const TopoDS_Face &	F1,
		const TopoDS_Face &	F2 )

Set two faces of <myShape> on which the Sphere must roll.

SetStoppingFace()

void BiTgte_Blend::SetStoppingFace

(

const TopoDS_Face &

Face

)

Set a face on which the fillet must stop.

Shape()

const TopoDS_Shape & BiTgte_Blend::Shape

(

)

const

returns the result

SupportShape1()

const TopoDS_Shape & BiTgte_Blend::SupportShape1

(

const int

Index

)

const

gives the first support shape relative to SurfaceFillet(Index);

SupportShape2()

const TopoDS_Shape & BiTgte_Blend::SupportShape2

(

const int

Index

)

const

gives the second support shape relative to SurfaceFillet(Index);

Surface() [1/2]

occ::handle< Geom_Surface > BiTgte_Blend::Surface

(

const int

Index

)

const

returns the surface of range Index

Surface() [2/2]

occ::handle< Geom_Surface > BiTgte_Blend::Surface

(

const TopoDS_Shape &

CenterLine

)

const

returns the surface generated by the centerline. <CenterLine> may be

• an edge : generate a pipe.
• a vertex : generate a sphere. Warning: returns a Null Handle if <CenterLine> generates no surface.

---

The documentation for this class was generated from the following file:

• BiTgte_Blend.hxx