BlendFunc_CSCircular Class Reference

#include <BlendFunc_CSCircular.hxx>

Inheritance diagram for BlendFunc_CSCircular:

Public Member Functions
	BlendFunc_CSCircular (const occ::handle< Adaptor3d_Surface > &S, const occ::handle< Adaptor3d_Curve > &C, const occ::handle< Adaptor3d_Curve > &CGuide, const occ::handle< Law_Function > &L)
	Creates a function for a circular blending between a curve and a surface . The direction of the planes are given by <CGuide>. The position of the plane is determined on the curve . <L> defines the change of parameter between and <CGuide>. So, the planes are defined as described below: t is the current parameter on the guide line. Pguide = C(L(t)); Nguide = CGuide'(t)/||CGuide'(t)||.
int	NbVariables () const override
	Returns 3 (default value). Can be redefined.
int	NbEquations () const override
	returns the number of equations of the function (3).
bool	Value (const math_Vector &X, math_Vector &F) override
	computes the values <F> of the Functions for the variable <X>. Returns True if the computation was done successfully, False otherwise.
bool	Derivatives (const math_Vector &X, math_Matrix &D) override
	returns the values <D> of the derivatives for the variable <X>. Returns True if the computation was done successfully, False otherwise.
bool	Values (const math_Vector &X, math_Vector &F, math_Matrix &D) override
	returns the values <F> of the functions and the derivatives <D> for the variable <X>. Returns True if the computation was done successfully, False otherwise.
void	Set (const double Param) override
	Sets the value of the parameter along the guide line. This determines the plane in which the solution has to be found.
void	Set (const double First, const double Last) override
	Sets the bounds of the parametric interval on the guide line. This determines the derivatives in these values if the function is not Cn.
void	GetTolerance (math_Vector &Tolerance, const double Tol) const override
	Returns in the vector Tolerance the parametric tolerance for each of the 3 variables; Tol is the tolerance used in 3d space.
void	GetBounds (math_Vector &InfBound, math_Vector &SupBound) const override
	Returns in the vector InfBound the lowest values allowed for each of the 3 variables. Returns in the vector SupBound the greatest values allowed for each of the 3 variables.
bool	IsSolution (const math_Vector &Sol, const double Tol) override
	Returns true if Sol is a zero of the function. Tol is the tolerance used in 3d space. The computation is made at the current value of the parameter on the guide line.
const gp_Pnt &	PointOnS () const override
	Returns the point on the surface.
const gp_Pnt &	PointOnC () const override
	Returns the point on the curve.
const gp_Pnt2d &	Pnt2d () const override
	Returns U,V coordinates of the point on the surface.
double	ParameterOnC () const override
	Returns parameter of the point on the curve.
bool	IsTangencyPoint () const override
	Returns True when it is not possible to compute the tangent vectors at PointOnS and/or PointOnC.
const gp_Vec &	TangentOnS () const override
	Returns the tangent vector at PointOnS, in 3d space.
const gp_Vec2d &	Tangent2d () const override
	Returns the tangent vector at PointOnS, in the parametric space of the first surface.
const gp_Vec &	TangentOnC () const override
	Returns the tangent vector at PointOnC, in 3d space.
void	Tangent (const double U, const double V, gp_Vec &TgS, gp_Vec &NormS) const override
	Returns the tangent vector at the section, at the beginning and the end of the section, and returns the normal (of the surface) at these points.
void	Set (const double Radius, const int Choix)
void	Set (const BlendFunc_SectionShape TypeSection)
	Sets the type of section generation for the approximations.
void	Section (const double Param, const double U, const double V, const double W, double &Pdeb, double &Pfin, gp_Circ &C)
bool	Section (const Blend_Point &P, NCollection_Array1< gp_Pnt > &Poles, NCollection_Array1< gp_Vec > &DPoles, NCollection_Array1< gp_Vec > &D2Poles, NCollection_Array1< gp_Pnt2d > &Poles2d, NCollection_Array1< gp_Vec2d > &DPoles2d, NCollection_Array1< gp_Vec2d > &D2Poles2d, NCollection_Array1< double > &Weigths, NCollection_Array1< double > &DWeigths, NCollection_Array1< double > &D2Weigths) override
	Used for the first and last section The method returns true if the derivatives are computed, otherwise it returns false.
bool	GetSection (const double Param, const double U, const double V, const double W, NCollection_Array1< gp_Pnt > &tabP, NCollection_Array1< gp_Vec > &tabV)
bool	IsRational () const override
	Returns if the section is rational.
double	GetSectionSize () const override
	Returns the length of the maximum section.
void	GetMinimalWeight (NCollection_Array1< double > &Weigths) const override
	Compute the minimal value of weight for each poles of all sections.
int	NbIntervals (const GeomAbs_Shape S) const override
	Returns the number of intervals for continuity . May be one if Continuity(me) >= .
void	Intervals (NCollection_Array1< double > &T, const GeomAbs_Shape S) const override
	Stores in <T> the parameters bounding the intervals of continuity .
void	GetShape (int &NbPoles, int &NbKnots, int &Degree, int &NbPoles2d) override
void	GetTolerance (const double BoundTol, const double SurfTol, const double AngleTol, math_Vector &Tol3d, math_Vector &Tol1D) const override
	Returns the tolerance to reach in approximation to respect BoundTol error at the Boundary AngleTol tangent error at the Boundary SurfTol error inside the surface.
void	Knots (NCollection_Array1< double > &TKnots) override
void	Mults (NCollection_Array1< int > &TMults) override
bool	Section (const Blend_Point &P, NCollection_Array1< gp_Pnt > &Poles, NCollection_Array1< gp_Vec > &DPoles, NCollection_Array1< gp_Pnt2d > &Poles2d, NCollection_Array1< gp_Vec2d > &DPoles2d, NCollection_Array1< double > &Weigths, NCollection_Array1< double > &DWeigths) override
	Used for the first and last section.
void	Section (const Blend_Point &P, NCollection_Array1< gp_Pnt > &Poles, NCollection_Array1< gp_Pnt2d > &Poles2d, NCollection_Array1< double > &Weigths) override
void	Resolution (const int IC2d, const double Tol, double &TolU, double &TolV) const override
Public Member Functions inherited from Blend_CSFunction
double	GetMinimalDistance () const override
	Returns the minimal Distance between two extremities of calculated sections.
const gp_Pnt &	Pnt1 () const override
	Returns the point on the first support.
const gp_Pnt &	Pnt2 () const override
	Returns the point on the second support.
Public Member Functions inherited from Blend_AppFunction
double	Parameter (const Blend_Point &P) const
	Returns the parameter of the point P. Used to impose the parameters in the approximation.
Public Member Functions inherited from math_FunctionSet
virtual int	GetStateNumber ()
	Returns the state of the function corresponding to the latestcall of any methods associated with the function. This function is called by each of the algorithms described later which define the function Integer Algorithm::StateNumber(). The algorithm has the responsibility to call this function when it has found a solution (i.e. a root or a minimum) and has to maintain the association between the solution found and this StateNumber. Byu default, this method returns 0 (which means for the algorithm: no state has been saved). It is the responsibility of the programmer to decide if he needs to save the current state of the function and to return an Integer that allows retrieval of the state.
virtual	~math_FunctionSet ()

Constructor & Destructor Documentation

BlendFunc_CSCircular()

BlendFunc_CSCircular::BlendFunc_CSCircular	(	const occ::handle< Adaptor3d_Surface > &	S,
		const occ::handle< Adaptor3d_Curve > &	C,
		const occ::handle< Adaptor3d_Curve > &	CGuide,
		const occ::handle< Law_Function > &	L )

Creates a function for a circular blending between a curve and a surface . The direction of the planes are given by <CGuide>. The position of the plane is determined on the curve . <L> defines the change of parameter between and <CGuide>. So, the planes are defined as described below: t is the current parameter on the guide line. Pguide = C(L(t)); Nguide = CGuide'(t)/||CGuide'(t)||.

Member Function Documentation

Derivatives()

bool BlendFunc_CSCircular::Derivatives ( const math_Vector & X, math_Matrix & D )

overridevirtual

returns the values <D> of the derivatives for the variable <X>. Returns True if the computation was done successfully, False otherwise.

Implements Blend_CSFunction.

GetBounds()

void BlendFunc_CSCircular::GetBounds ( math_Vector & InfBound, math_Vector & SupBound ) const

overridevirtual

Returns in the vector InfBound the lowest values allowed for each of the 3 variables. Returns in the vector SupBound the greatest values allowed for each of the 3 variables.

Implements Blend_CSFunction.

GetMinimalWeight()

void BlendFunc_CSCircular::GetMinimalWeight ( NCollection_Array1< double > & Weigths ) const

overridevirtual

Compute the minimal value of weight for each poles of all sections.

Implements Blend_AppFunction.

GetSection()

bool BlendFunc_CSCircular::GetSection	(	const double	Param,
		const double	U,
		const double	V,
		const double	W,
		NCollection_Array1< gp_Pnt > &	tabP,
		NCollection_Array1< gp_Vec > &	tabV )

GetSectionSize()

double BlendFunc_CSCircular::GetSectionSize ( ) const

overridevirtual

Returns the length of the maximum section.

Implements Blend_AppFunction.

GetShape()

void BlendFunc_CSCircular::GetShape ( int & NbPoles, int & NbKnots, int & Degree, int & NbPoles2d )

overridevirtual

Implements Blend_CSFunction.

GetTolerance() [1/2]

void BlendFunc_CSCircular::GetTolerance ( const double BoundTol, const double SurfTol, const double AngleTol, math_Vector & Tol3d, math_Vector & Tol1D ) const

overridevirtual

Returns the tolerance to reach in approximation to respect BoundTol error at the Boundary AngleTol tangent error at the Boundary SurfTol error inside the surface.

Implements Blend_CSFunction.

GetTolerance() [2/2]

void BlendFunc_CSCircular::GetTolerance ( math_Vector & Tolerance, const double Tol ) const

overridevirtual

Returns in the vector Tolerance the parametric tolerance for each of the 3 variables; Tol is the tolerance used in 3d space.

Implements Blend_CSFunction.

Intervals()

void BlendFunc_CSCircular::Intervals ( NCollection_Array1< double > & T, const GeomAbs_Shape S ) const

overridevirtual

Stores in <T> the parameters bounding the intervals of continuity .

The array must provide enough room to accommodate for the parameters. i.e. T.Length() > NbIntervals() raises OutOfRange from Standard

Implements Blend_AppFunction.

IsRational()

bool BlendFunc_CSCircular::IsRational ( ) const

overridevirtual

Returns if the section is rational.

Implements Blend_AppFunction.

IsSolution()

bool BlendFunc_CSCircular::IsSolution ( const math_Vector & Sol, const double Tol )

overridevirtual

Returns true if Sol is a zero of the function. Tol is the tolerance used in 3d space. The computation is made at the current value of the parameter on the guide line.

Implements Blend_CSFunction.

IsTangencyPoint()

bool BlendFunc_CSCircular::IsTangencyPoint ( ) const

overridevirtual

Returns True when it is not possible to compute the tangent vectors at PointOnS and/or PointOnC.

Implements Blend_CSFunction.

Knots()

void BlendFunc_CSCircular::Knots ( NCollection_Array1< double > & TKnots )

overridevirtual

Implements Blend_CSFunction.

Mults()

void BlendFunc_CSCircular::Mults ( NCollection_Array1< int > & TMults )

overridevirtual

Implements Blend_CSFunction.

NbEquations()

int BlendFunc_CSCircular::NbEquations ( ) const

overridevirtual

returns the number of equations of the function (3).

Implements Blend_CSFunction.

NbIntervals()

int BlendFunc_CSCircular::NbIntervals ( const GeomAbs_Shape S ) const

overridevirtual

Returns the number of intervals for continuity . May be one if Continuity(me) >= .

Implements Blend_AppFunction.

NbVariables()

int BlendFunc_CSCircular::NbVariables ( ) const

overridevirtual

Returns 3 (default value). Can be redefined.

Reimplemented from Blend_CSFunction.

ParameterOnC()

double BlendFunc_CSCircular::ParameterOnC ( ) const

overridevirtual

Returns parameter of the point on the curve.

Implements Blend_CSFunction.

Pnt2d()

const gp_Pnt2d & BlendFunc_CSCircular::Pnt2d ( ) const

overridevirtual

Returns U,V coordinates of the point on the surface.

Implements Blend_CSFunction.

PointOnC()

const gp_Pnt & BlendFunc_CSCircular::PointOnC ( ) const

overridevirtual

Returns the point on the curve.

Implements Blend_CSFunction.

PointOnS()

const gp_Pnt & BlendFunc_CSCircular::PointOnS ( ) const

overridevirtual

Returns the point on the surface.

Implements Blend_CSFunction.

Resolution()

void BlendFunc_CSCircular::Resolution ( const int IC2d, const double Tol, double & TolU, double & TolV ) const

overridevirtual

Implements Blend_AppFunction.

Section() [1/4]

void BlendFunc_CSCircular::Section ( const Blend_Point & P, NCollection_Array1< gp_Pnt > & Poles, NCollection_Array1< gp_Pnt2d > & Poles2d, NCollection_Array1< double > & Weigths )

overridevirtual

Implements Blend_CSFunction.

Section() [2/4]

bool BlendFunc_CSCircular::Section ( const Blend_Point & P, NCollection_Array1< gp_Pnt > & Poles, NCollection_Array1< gp_Vec > & DPoles, NCollection_Array1< gp_Pnt2d > & Poles2d, NCollection_Array1< gp_Vec2d > & DPoles2d, NCollection_Array1< double > & Weigths, NCollection_Array1< double > & DWeigths )

overridevirtual

Used for the first and last section.

Implements Blend_CSFunction.

Section() [3/4]

bool BlendFunc_CSCircular::Section ( const Blend_Point & P, NCollection_Array1< gp_Pnt > & Poles, NCollection_Array1< gp_Vec > & DPoles, NCollection_Array1< gp_Vec > & D2Poles, NCollection_Array1< gp_Pnt2d > & Poles2d, NCollection_Array1< gp_Vec2d > & DPoles2d, NCollection_Array1< gp_Vec2d > & D2Poles2d, NCollection_Array1< double > & Weigths, NCollection_Array1< double > & DWeigths, NCollection_Array1< double > & D2Weigths )

overridevirtual

Used for the first and last section The method returns true if the derivatives are computed, otherwise it returns false.

Reimplemented from Blend_CSFunction.

Section() [4/4]

void BlendFunc_CSCircular::Section	(	const double	Param,
		const double	U,
		const double	V,
		const double	W,
		double &	Pdeb,
		double &	Pfin,
		gp_Circ &	C )

Set() [1/4]

void BlendFunc_CSCircular::Set

(

const BlendFunc_SectionShape

TypeSection

)

Sets the type of section generation for the approximations.

Set() [2/4]

void BlendFunc_CSCircular::Set ( const double First, const double Last )

overridevirtual

Sets the bounds of the parametric interval on the guide line. This determines the derivatives in these values if the function is not Cn.

Implements Blend_CSFunction.

Set() [3/4]

void BlendFunc_CSCircular::Set ( const double Param )

overridevirtual

Sets the value of the parameter along the guide line. This determines the plane in which the solution has to be found.

Implements Blend_CSFunction.

Set() [4/4]

void BlendFunc_CSCircular::Set	(	const double	Radius,
		const int	Choix )

Tangent()

void BlendFunc_CSCircular::Tangent ( const double U, const double V, gp_Vec & TgS, gp_Vec & NormS ) const

overridevirtual

Returns the tangent vector at the section, at the beginning and the end of the section, and returns the normal (of the surface) at these points.

Implements Blend_CSFunction.

Tangent2d()

const gp_Vec2d & BlendFunc_CSCircular::Tangent2d ( ) const

overridevirtual

Returns the tangent vector at PointOnS, in the parametric space of the first surface.

Implements Blend_CSFunction.

TangentOnC()

const gp_Vec & BlendFunc_CSCircular::TangentOnC ( ) const

overridevirtual

Returns the tangent vector at PointOnC, in 3d space.

Implements Blend_CSFunction.

TangentOnS()

const gp_Vec & BlendFunc_CSCircular::TangentOnS ( ) const

overridevirtual

Returns the tangent vector at PointOnS, in 3d space.

Implements Blend_CSFunction.

Value()

bool BlendFunc_CSCircular::Value ( const math_Vector & X, math_Vector & F )

overridevirtual

computes the values <F> of the Functions for the variable <X>. Returns True if the computation was done successfully, False otherwise.

Implements Blend_CSFunction.

Values()

bool BlendFunc_CSCircular::Values ( const math_Vector & X, math_Vector & F, math_Matrix & D )

overridevirtual

returns the values <F> of the functions and the derivatives <D> for the variable <X>. Returns True if the computation was done successfully, False otherwise.

Implements Blend_CSFunction.

---

The documentation for this class was generated from the following file:

• BlendFunc_CSCircular.hxx