ChFiDS_FilSpine Class Reference

Provides data specific to the fillets - vector or rule of evolution (C2). More...

#include <ChFiDS_FilSpine.hxx>

Inheritance diagram for ChFiDS_FilSpine:

Public Member Functions
	ChFiDS_FilSpine ()
	ChFiDS_FilSpine (const double Tol)
void	Reset (const bool AllData=false) override
void	SetRadius (const double Radius, const TopoDS_Edge &E)
	initializes the constant vector on edge E.
void	UnSetRadius (const TopoDS_Edge &E)
	resets the constant vector on edge E.
void	SetRadius (const double Radius, const TopoDS_Vertex &V)
	initializes the vector on Vertex V.
void	UnSetRadius (const TopoDS_Vertex &V)
	resets the vector on Vertex V.
void	SetRadius (const gp_XY &UandR, const int IinC)
	initializes the vector on the point of parameter W.
void	SetRadius (const double Radius)
	initializes the constant vector on all spine.
void	SetRadius (const occ::handle< Law_Function > &C, const int IinC)
	initializes the rule of evolution on all spine.
bool	IsConstant () const
	returns true if the radius is constant all along the spine.
bool	IsConstant (const int IE) const
	returns true if the radius is constant all along the edge E.
double	Radius () const
	returns the radius if the fillet is constant all along the spine.
double	Radius (const int IE) const
	returns the radius if the fillet is constant all along the edge E.
double	Radius (const TopoDS_Edge &E) const
	returns the radius if the fillet is constant all along the edge E.
void	AppendElSpine (const occ::handle< ChFiDS_ElSpine > &Els) override
occ::handle< Law_Composite >	Law (const occ::handle< ChFiDS_ElSpine > &Els) const
occ::handle< Law_Function > &	ChangeLaw (const TopoDS_Edge &E)
	returns the elementary law
double	MaxRadFromSeqAndLaws () const
	returns the maximum radius if the fillet is non-constant
Public Member Functions inherited from ChFiDS_Spine
	ChFiDS_Spine ()
	ChFiDS_Spine (const double Tol)
void	SetEdges (const TopoDS_Edge &E)
	store edges composing the guideline
void	SetOffsetEdges (const TopoDS_Edge &E)
	store offset edges composing the offset guideline
void	PutInFirst (const TopoDS_Edge &E)
	store the edge at the first position before all others
void	PutInFirstOffset (const TopoDS_Edge &E)
	store the offset edge at the first position before all others
int	NbEdges () const
const TopoDS_Edge &	Edges (const int I) const
const TopoDS_Edge &	OffsetEdges (const int I) const
void	SetFirstStatus (const ChFiDS_State S)
	stores if the start of a set of edges starts on a section of free border or forms a closed contour
void	SetLastStatus (const ChFiDS_State S)
	stores if the end of a set of edges starts on a section of free border or forms a closed contour
virtual void	AppendOffsetElSpine (const occ::handle< ChFiDS_ElSpine > &Els)
occ::handle< ChFiDS_ElSpine >	ElSpine (const int IE) const
occ::handle< ChFiDS_ElSpine >	ElSpine (const TopoDS_Edge &E) const
occ::handle< ChFiDS_ElSpine >	ElSpine (const double W) const
NCollection_List< occ::handle< ChFiDS_ElSpine > > &	ChangeElSpines ()
NCollection_List< occ::handle< ChFiDS_ElSpine > > &	ChangeOffsetElSpines ()
bool	SplitDone () const
void	SplitDone (const bool B)
void	Load ()
	prepare the guideline depending on the edges that are elementary arks (take parameters from a single curvilinear abscissa); to be able to call methods on the geometry (first,last,value,d1,d2) it is necessary to start with preparation otherwise an exception will be raised
double	Resolution (const double R3d) const
bool	IsClosed () const
double	FirstParameter () const
double	LastParameter () const
void	SetFirstParameter (const double Par)
void	SetLastParameter (const double Par)
double	FirstParameter (const int IndexSpine) const
	gives the total length of all arcs before the number IndexSp
double	LastParameter (const int IndexSpine) const
	gives the total length till the ark with number IndexSpine (inclus)
double	Length (const int IndexSpine) const
	gives the length of ark with number IndexSp
bool	IsPeriodic () const
double	Period () const
double	Absc (const double U)
double	Absc (const double U, const int I)
void	Parameter (const double AbsC, double &U, const bool Oriented=true)
void	Parameter (const int Index, const double AbsC, double &U, const bool Oriented=true)
gp_Pnt	Value (const double AbsC)
void	D0 (const double AbsC, gp_Pnt &P)
void	D1 (const double AbsC, gp_Pnt &P, gp_Vec &V1)
void	D2 (const double AbsC, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2)
void	SetCurrent (const int Index)
const BRepAdaptor_Curve &	CurrentElementarySpine (const int Index)
	sets the current curve and returns it
int	CurrentIndexOfElementarySpine () const
GeomAbs_CurveType	GetType () const
gp_Lin	Line () const
gp_Circ	Circle () const
ChFiDS_State	FirstStatus () const
	returns if the set of edges starts on a free boundary or if the first vertex is a breakpoint or if the set is closed
ChFiDS_State	LastStatus () const
	returns the state at the end of the set
ChFiDS_State	Status (const bool IsFirst) const
ChFiDS_TypeOfConcavity	GetTypeOfConcavity () const
	returns the type of concavity in the connection
void	SetStatus (const ChFiDS_State S, const bool IsFirst)
void	SetTypeOfConcavity (const ChFiDS_TypeOfConcavity theType)
	sets the type of concavity in the connection
bool	IsTangencyExtremity (const bool IsFirst) const
	returns if the set of edges starts (or end) on Tangency point.
void	SetTangencyExtremity (const bool IsTangency, const bool IsFirst)
double	Absc (const TopoDS_Vertex &V) const
TopoDS_Vertex	FirstVertex () const
TopoDS_Vertex	LastVertex () const
void	SetFirstTgt (const double W)
void	SetLastTgt (const double W)
bool	HasFirstTgt () const
bool	HasLastTgt () const
void	SetReference (const double W)
	set a parameter reference for the approx.
void	SetReference (const int I)
	set a parameter reference for the approx, at the middle of edge I.
int	Index (const double W, const bool Forward=true) const
int	Index (const TopoDS_Edge &E) const
void	UnsetReference ()
void	SetErrorStatus (const ChFiDS_ErrorStatus state)
ChFiDS_ErrorStatus	ErrorStatus () const
ChFiDS_ChamfMode	Mode () const
	Return the mode of chamfers used.
double	GetTolesp () const
	Return tolesp parameter.
Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.
	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.
Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.
virtual	~Standard_Transient ()=default
	Destructor must be virtual.
virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.
bool	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.
bool	IsInstance (const char *const theTypeName) const
	Returns a true value if this is an instance of TypeName.
bool	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
bool	IsKind (const char *const theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.
int	GetRefCount () const noexcept
	Get the reference counter of this object.
void	IncrementRefCounter () noexcept
	Increments the reference counter of this object. Uses relaxed memory ordering since incrementing only requires atomicity, not synchronization with other memory operations.
int	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value. Uses release ordering for the decrement to ensure all writes to the object are visible before the count reaches zero. An acquire fence is added only when the count reaches zero, ensuring proper synchronization before deletion. This is more efficient than using acq_rel for every decrement.
virtual void	Delete () const
	Memory deallocator for transient classes.

Additional Inherited Members
typedef void	base_type
	Returns a type descriptor about this object.
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.
static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.
Protected Attributes inherited from ChFiDS_Spine
bool	splitdone
NCollection_List< occ::handle< ChFiDS_ElSpine > >	elspines
NCollection_List< occ::handle< ChFiDS_ElSpine > >	offset_elspines
ChFiDS_ChamfMode	myMode

Detailed Description

Provides data specific to the fillets - vector or rule of evolution (C2).

Constructor & Destructor Documentation

ChFiDS_FilSpine() [1/2]

ChFiDS_FilSpine::ChFiDS_FilSpine

(

)

ChFiDS_FilSpine() [2/2]

ChFiDS_FilSpine::ChFiDS_FilSpine

(

const double

Tol

)

Member Function Documentation

AppendElSpine()

void ChFiDS_FilSpine::AppendElSpine ( const occ::handle< ChFiDS_ElSpine > & Els )

overridevirtual

Reimplemented from ChFiDS_Spine.

ChangeLaw()

occ::handle< Law_Function > & ChFiDS_FilSpine::ChangeLaw

(

const TopoDS_Edge &

E

)

returns the elementary law

IsConstant() [1/2]

bool ChFiDS_FilSpine::IsConstant

(

)

const

returns true if the radius is constant all along the spine.

IsConstant() [2/2]

bool ChFiDS_FilSpine::IsConstant

(

const int

IE

)

const

returns true if the radius is constant all along the edge E.

Law()

occ::handle< Law_Composite > ChFiDS_FilSpine::Law

(

const occ::handle< ChFiDS_ElSpine > &

Els

)

const

MaxRadFromSeqAndLaws()

double ChFiDS_FilSpine::MaxRadFromSeqAndLaws

(

)

const

returns the maximum radius if the fillet is non-constant

Radius() [1/3]

double ChFiDS_FilSpine::Radius

(

)

const

returns the radius if the fillet is constant all along the spine.

Radius() [2/3]

double ChFiDS_FilSpine::Radius

(

const int

IE

)

const

returns the radius if the fillet is constant all along the edge E.

Radius() [3/3]

double ChFiDS_FilSpine::Radius

(

const TopoDS_Edge &

E

)

const

returns the radius if the fillet is constant all along the edge E.

Reset()

void ChFiDS_FilSpine::Reset ( const bool AllData = false )

overridevirtual

Reimplemented from ChFiDS_Spine.

SetRadius() [1/5]

void ChFiDS_FilSpine::SetRadius

(

const double

Radius

)

initializes the constant vector on all spine.

SetRadius() [2/5]

void ChFiDS_FilSpine::SetRadius	(	const double	Radius,
		const TopoDS_Edge &	E )

initializes the constant vector on edge E.

SetRadius() [3/5]

void ChFiDS_FilSpine::SetRadius	(	const double	Radius,
		const TopoDS_Vertex &	V )

initializes the vector on Vertex V.

SetRadius() [4/5]

void ChFiDS_FilSpine::SetRadius	(	const gp_XY &	UandR,
		const int	IinC )

initializes the vector on the point of parameter W.

SetRadius() [5/5]

void ChFiDS_FilSpine::SetRadius	(	const occ::handle< Law_Function > &	C,
		const int	IinC )

initializes the rule of evolution on all spine.

UnSetRadius() [1/2]

void ChFiDS_FilSpine::UnSetRadius

(

const TopoDS_Edge &

E

)

resets the constant vector on edge E.

UnSetRadius() [2/2]

void ChFiDS_FilSpine::UnSetRadius

(

const TopoDS_Vertex &

V

)

resets the vector on Vertex V.

---

The documentation for this class was generated from the following file:

• ChFiDS_FilSpine.hxx