Describes a circle in the plane (2D space). A circle is defined by its radius and positioned in the plane with a coordinate system (a gp_Ax22d object) as follows: More...

#include <gp_Circ2d.hxx>

Public Member Functions
constexpr	gp_Circ2d () noexcept
	creates an indefinite circle.
constexpr	gp_Circ2d (const gp_Ax2d &theXAxis, const double theRadius, const bool theIsSense=true)
	The location point of theXAxis is the center of the circle. Warnings: It is not forbidden to create a circle with theRadius = 0.0 Raises ConstructionError if theRadius < 0.0.
constexpr	gp_Circ2d (const gp_Ax22d &theAxis, const double theRadius)
	theAxis defines the Xaxis and Yaxis of the circle which defines the origin and the sense of parametrization. The location point of theAxis is the center of the circle. Warnings: It is not forbidden to create a circle with theRadius = 0.0 Raises ConstructionError if theRadius < 0.0.
constexpr void	SetLocation (const gp_Pnt2d &theP) noexcept
	Changes the location point (center) of the circle.
constexpr void	SetXAxis (const gp_Ax2d &theA)
	Changes the X axis of the circle.
constexpr void	SetAxis (const gp_Ax22d &theA) noexcept
	Changes the X axis of the circle.
constexpr void	SetYAxis (const gp_Ax2d &theA)
	Changes the Y axis of the circle.
void	SetRadius (const double theRadius)
	Modifies the radius of this circle. This class does not prevent the creation of a circle where theRadius is null. Exceptions Standard_ConstructionError if theRadius is negative.
constexpr double	Area () const noexcept
	Computes the area of the circle.
constexpr void	Coefficients (double &theA, double &theB, double &theC, double &theD, double &theE, double &theF) const noexcept
	Returns the normalized coefficients from the implicit equation of the circle : theA * (X*2) + theB (Y*2) + 2theC(XY) + 2theDX + 2theEY + theF = 0.0.
bool	Contains (const gp_Pnt2d &theP, const double theLinearTolerance) const noexcept
	Does <me> contain theP ? Returns True if the distance between theP and any point on the circumference of the circle is lower of equal to <theLinearTolerance>.
double	Distance (const gp_Pnt2d &theP) const noexcept
	Computes the minimum of distance between the point theP and any point on the circumference of the circle.
double	SquareDistance (const gp_Pnt2d &theP) const noexcept
	Computes the square distance between <me> and the point theP.
constexpr double	Length () const noexcept
	computes the circumference of the circle.
constexpr const gp_Pnt2d &	Location () const noexcept
	Returns the location point (center) of the circle.
constexpr double	Radius () const noexcept
	Returns the radius value of the circle.
constexpr const gp_Ax22d &	Axis () const noexcept
	returns the position of the circle.
constexpr const gp_Ax22d &	Position () const noexcept
	returns the position of the circle. Idem Axis(me).
gp_Ax2d	XAxis () const noexcept
	returns the X axis of the circle.
gp_Ax2d	YAxis () const noexcept
	Returns the Y axis of the circle. Reverses the direction of the circle.
void	Reverse () noexcept
	Reverses the orientation of the local coordinate system of this circle (the "Y Direction" is reversed) and therefore changes the implicit orientation of this circle. Reverse assigns the result to this circle,.
gp_Circ2d	Reversed () const noexcept
	Reverses the orientation of the local coordinate system of this circle (the "Y Direction" is reversed) and therefore changes the implicit orientation of this circle. Reversed creates a new circle.
constexpr bool	IsDirect () const noexcept
	Returns true if the local coordinate system is direct and false in the other case.
void	Mirror (const gp_Pnt2d &theP) noexcept
gp_Circ2d	Mirrored (const gp_Pnt2d &theP) const noexcept
	Performs the symmetrical transformation of a circle with respect to the point theP which is the center of the symmetry.
void	Mirror (const gp_Ax2d &theA) noexcept
gp_Circ2d	Mirrored (const gp_Ax2d &theA) const noexcept
	Performs the symmetrical transformation of a circle with respect to an axis placement which is the axis of the symmetry.
void	Rotate (const gp_Pnt2d &theP, const double theAng)
gp_Circ2d	Rotated (const gp_Pnt2d &theP, const double theAng) const
	Rotates a circle. theP is the center of the rotation. Ang is the angular value of the rotation in radians.
void	Scale (const gp_Pnt2d &theP, const double theS)
gp_Circ2d	Scaled (const gp_Pnt2d &theP, const double theS) const
	Scales a circle. theS is the scaling value. Warnings: If theS is negative the radius stay positive but the "XAxis" and the "YAxis" are reversed as for an ellipse.
void	Transform (const gp_Trsf2d &theT)
gp_Circ2d	Transformed (const gp_Trsf2d &theT) const
	Transforms a circle with the transformation theT from class Trsf2d.
constexpr void	Translate (const gp_Vec2d &theV) noexcept
constexpr gp_Circ2d	Translated (const gp_Vec2d &theV) const noexcept
	Translates a circle in the direction of the vector theV. The magnitude of the translation is the vector's magnitude.
constexpr void	Translate (const gp_Pnt2d &theP1, const gp_Pnt2d &theP2) noexcept
constexpr gp_Circ2d	Translated (const gp_Pnt2d &theP1, const gp_Pnt2d &theP2) const noexcept
	Translates a circle from the point theP1 to the point theP2.

Detailed Description

Describes a circle in the plane (2D space). A circle is defined by its radius and positioned in the plane with a coordinate system (a gp_Ax22d object) as follows:

the origin of the coordinate system is the center of the circle, and
the orientation (direct or indirect) of the coordinate system gives an implicit orientation to the circle (and defines its trigonometric sense). This positioning coordinate system is the "local coordinate system" of the circle. Note: when a gp_Circ2d circle is converted into a Geom2d_Circle circle, some implicit properties of the circle are used explicitly:
the implicit orientation corresponds to the direction in which parameter values increase,
the starting point for parameterization is that of the "X Axis" of the local coordinate system (i.e. the "X Axis" of the circle). See Also GccAna and Geom2dGcc packages which provide functions for constructing circles defined by geometric constraints gce_MakeCirc2d which provides functions for more complex circle constructions Geom2d_Circle which provides additional functions for constructing circles and works, with the parametric equations of circles in particular gp_Ax22d

Constructor & Destructor Documentation

◆ gp_Circ2d() [1/3]

gp_Circ2d::gp_Circ2d ( )

inlineconstexprnoexcept

creates an indefinite circle.

◆ gp_Circ2d() [2/3]

gp_Circ2d::gp_Circ2d	(	const gp_Ax2d &	theXAxis,
		const double	theRadius,
		const bool	theIsSense = true )

inlineconstexpr

The location point of theXAxis is the center of the circle. Warnings: It is not forbidden to create a circle with theRadius = 0.0 Raises ConstructionError if theRadius < 0.0.

◆ gp_Circ2d() [3/3]

gp_Circ2d::gp_Circ2d	(	const gp_Ax22d &	theAxis,
		const double	theRadius )

inlineconstexpr

theAxis defines the Xaxis and Yaxis of the circle which defines the origin and the sense of parametrization. The location point of theAxis is the center of the circle. Warnings: It is not forbidden to create a circle with theRadius = 0.0 Raises ConstructionError if theRadius < 0.0.

Member Function Documentation

◆ Area()

double gp_Circ2d::Area ( ) const

inlineconstexprnoexcept

Computes the area of the circle.

◆ Axis()

const gp_Ax22d & gp_Circ2d::Axis ( ) const

inlineconstexprnoexcept

returns the position of the circle.

◆ Coefficients()

void gp_Circ2d::Coefficients	(	double &	theA,
		double &	theB,
		double &	theC,
		double &	theD,
		double &	theE,
		double &	theF ) const

inlineconstexprnoexcept

Returns the normalized coefficients from the implicit equation of the circle : theA * (X**2) + theB * (Y**2) + 2*theC*(X*Y) + 2*theD*X + 2*theE*Y + theF = 0.0.

◆ Contains()

bool gp_Circ2d::Contains	(	const gp_Pnt2d &	theP,
		const double	theLinearTolerance ) const

inlinenoexcept

Does <me> contain theP ? Returns True if the distance between theP and any point on the circumference of the circle is lower of equal to <theLinearTolerance>.

◆ Distance()

double gp_Circ2d::Distance ( const gp_Pnt2d & theP ) const

inlinenoexcept

Computes the minimum of distance between the point theP and any point on the circumference of the circle.

◆ IsDirect()

bool gp_Circ2d::IsDirect ( ) const

inlineconstexprnoexcept

Returns true if the local coordinate system is direct and false in the other case.

◆ Length()

double gp_Circ2d::Length ( ) const

inlineconstexprnoexcept

computes the circumference of the circle.

◆ Location()

const gp_Pnt2d & gp_Circ2d::Location ( ) const

inlineconstexprnoexcept

Returns the location point (center) of the circle.

◆ Mirror() [1/2]

void gp_Circ2d::Mirror ( const gp_Ax2d & theA )

noexcept

◆ Mirror() [2/2]

void gp_Circ2d::Mirror ( const gp_Pnt2d & theP )

noexcept

◆ Mirrored() [1/2]

gp_Circ2d gp_Circ2d::Mirrored ( const gp_Ax2d & theA ) const

nodiscardnoexcept

Performs the symmetrical transformation of a circle with respect to an axis placement which is the axis of the symmetry.

◆ Mirrored() [2/2]

gp_Circ2d gp_Circ2d::Mirrored ( const gp_Pnt2d & theP ) const

nodiscardnoexcept

Performs the symmetrical transformation of a circle with respect to the point theP which is the center of the symmetry.

◆ Position()

const gp_Ax22d & gp_Circ2d::Position ( ) const

inlineconstexprnoexcept

returns the position of the circle. Idem Axis(me).

◆ Radius()

double gp_Circ2d::Radius ( ) const

inlineconstexprnoexcept

Returns the radius value of the circle.

◆ Reverse()

void gp_Circ2d::Reverse ( )

inlinenoexcept

Reverses the orientation of the local coordinate system of this circle (the "Y Direction" is reversed) and therefore changes the implicit orientation of this circle. Reverse assigns the result to this circle,.

◆ Reversed()

gp_Circ2d gp_Circ2d::Reversed ( ) const

inlinenodiscardnoexcept

Reverses the orientation of the local coordinate system of this circle (the "Y Direction" is reversed) and therefore changes the implicit orientation of this circle. Reversed creates a new circle.

◆ Rotate()

void gp_Circ2d::Rotate	(	const gp_Pnt2d &	theP,
		const double	theAng )

inline

◆ Rotated()

gp_Circ2d gp_Circ2d::Rotated	(	const gp_Pnt2d &	theP,
		const double	theAng ) const

inlinenodiscard

Rotates a circle. theP is the center of the rotation. Ang is the angular value of the rotation in radians.

◆ Scale()

void gp_Circ2d::Scale	(	const gp_Pnt2d &	theP,
		const double	theS )

inline

◆ Scaled()

gp_Circ2d gp_Circ2d::Scaled	(	const gp_Pnt2d &	theP,
		const double	theS ) const

inlinenodiscard

Scales a circle. theS is the scaling value. Warnings: If theS is negative the radius stay positive but the "XAxis" and the "YAxis" are reversed as for an ellipse.

◆ SetAxis()

void gp_Circ2d::SetAxis ( const gp_Ax22d & theA )

inlineconstexprnoexcept

Changes the X axis of the circle.

◆ SetLocation()

void gp_Circ2d::SetLocation ( const gp_Pnt2d & theP )

inlineconstexprnoexcept

Changes the location point (center) of the circle.

◆ SetRadius()

void gp_Circ2d::SetRadius ( const double theRadius )

inline

Modifies the radius of this circle. This class does not prevent the creation of a circle where theRadius is null. Exceptions Standard_ConstructionError if theRadius is negative.

◆ SetXAxis()

void gp_Circ2d::SetXAxis ( const gp_Ax2d & theA )

inlineconstexpr

Changes the X axis of the circle.

◆ SetYAxis()

void gp_Circ2d::SetYAxis ( const gp_Ax2d & theA )

inlineconstexpr

Changes the Y axis of the circle.

◆ SquareDistance()

double gp_Circ2d::SquareDistance ( const gp_Pnt2d & theP ) const

inlinenoexcept

Computes the square distance between <me> and the point theP.

◆ Transform()

void gp_Circ2d::Transform ( const gp_Trsf2d & theT )

inline

◆ Transformed()

gp_Circ2d gp_Circ2d::Transformed ( const gp_Trsf2d & theT ) const

inlinenodiscard

Transforms a circle with the transformation theT from class Trsf2d.

◆ Translate() [1/2]

void gp_Circ2d::Translate	(	const gp_Pnt2d &	theP1,
		const gp_Pnt2d &	theP2 )

inlineconstexprnoexcept

◆ Translate() [2/2]

void gp_Circ2d::Translate ( const gp_Vec2d & theV )

inlineconstexprnoexcept

◆ Translated() [1/2]

gp_Circ2d gp_Circ2d::Translated	(	const gp_Pnt2d &	theP1,
		const gp_Pnt2d &	theP2 ) const

inlinenodiscardconstexprnoexcept

Translates a circle from the point theP1 to the point theP2.

◆ Translated() [2/2]

gp_Circ2d gp_Circ2d::Translated ( const gp_Vec2d & theV ) const

inlinenodiscardconstexprnoexcept

Translates a circle in the direction of the vector theV. The magnitude of the translation is the vector's magnitude.

◆ XAxis()

gp_Ax2d gp_Circ2d::XAxis ( ) const

inlinenoexcept

returns the X axis of the circle.

◆ YAxis()

gp_Ax2d gp_Circ2d::YAxis ( ) const

inlinenoexcept

Returns the Y axis of the circle. Reverses the direction of the circle.

The documentation for this class was generated from the following file:

gp_Circ2d.hxx

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ gp_Circ2d() [1/3]

◆ gp_Circ2d() [2/3]

◆ gp_Circ2d() [3/3]

Member Function Documentation

◆ Area()

◆ Axis()

◆ Coefficients()

◆ Contains()

◆ Distance()

◆ IsDirect()

◆ Length()

◆ Location()

◆ Mirror() [1/2]

◆ Mirror() [2/2]

◆ Mirrored() [1/2]

◆ Mirrored() [2/2]

◆ Position()

◆ Radius()

◆ Reverse()

◆ Reversed()

◆ Rotate()

◆ Rotated()

◆ Scale()

◆ Scaled()

◆ SetAxis()

◆ SetLocation()

◆ SetRadius()

◆ SetXAxis()

◆ SetYAxis()

◆ SquareDistance()

◆ Transform()

◆ Transformed()

◆ Translate() [1/2]

◆ Translate() [2/2]

◆ Translated() [1/2]

◆ Translated() [2/2]

◆ XAxis()

◆ YAxis()