Representation of a curve by a curve in the parametric space of a surface. More...

#include <BRep_CurveOnSurface.hxx>

Inheritance diagram for BRep_CurveOnSurface:

[legend]

Public Member Functions
	BRep_CurveOnSurface (const occ::handle< Geom2d_Curve > &PC, const occ::handle< Geom_Surface > &S, const TopLoc_Location &L)
void	SetUVPoints (const gp_Pnt2d &P1, const gp_Pnt2d &P2)
void	UVPoints (gp_Pnt2d &P1, gp_Pnt2d &P2) const
void	D0 (const double U, gp_Pnt &P) const override
	Computes the point at parameter U.
bool	IsCurveOnSurface () const override
	Returns True.
bool	IsCurveOnSurface (const occ::handle< Geom_Surface > &S, const TopLoc_Location &L) const override
	A curve in the parametric space of a surface.
const occ::handle< Geom_Surface > &	Surface () const override
const occ::handle< Geom2d_Curve > &	PCurve () const override
void	PCurve (const occ::handle< Geom2d_Curve > &C) override
occ::handle< BRep_CurveRepresentation >	Copy () const override
	Return a copy of this representation.
void	Update () override
	Recomputes any derived data after a modification. This is called when the range is modified.
void	DumpJson (Standard_OStream &theOStream, int theDepth=-1) const override
	Dumps the content of me into the stream.
Public Member Functions inherited from BRep_GCurve
void	SetRange (const double First, const double Last)
void	Range (double &First, double &Last) const
double	First () const
double	Last () const
void	First (const double F)
void	Last (const double L)
void	DumpJson (Standard_OStream &theOStream, int theDepth=-1) const override
	Dumps the content of me into the stream.
Public Member Functions inherited from BRep_CurveRepresentation
virtual bool	IsCurve3D () const
	A 3D curve representation.
virtual bool	IsRegularity () const
	A continuity between two surfaces.
virtual bool	IsCurveOnClosedSurface () const
	A curve with two parametric curves on the same surface.
virtual bool	IsRegularity (const occ::handle< Geom_Surface > &S1, const occ::handle< Geom_Surface > &S2, const TopLoc_Location &L1, const TopLoc_Location &L2) const
	Is it a regularity between <S1> and <S2> with location <L1> and <L2>.
virtual bool	IsPolygon3D () const
	A 3D polygon representation.
virtual bool	IsPolygonOnTriangulation () const
	A representation by an array of nodes on a triangulation.
virtual bool	IsPolygonOnTriangulation (const occ::handle< Poly_Triangulation > &T, const TopLoc_Location &L) const
	Is it a polygon in the definition of <T> with location <L>.
virtual bool	IsPolygonOnClosedTriangulation () const
	A representation by two arrays of nodes on a triangulation.
virtual bool	IsPolygonOnSurface () const
	A polygon in the parametric space of a surface.
virtual bool	IsPolygonOnSurface (const occ::handle< Geom_Surface > &S, const TopLoc_Location &L) const
	Is it a polygon in the parametric space of ~~with location <L>.~~
virtual bool	IsPolygonOnClosedSurface () const
	Two 2D polygon representations in the parametric space of a surface.
const TopLoc_Location &	Location () const
void	Location (const TopLoc_Location &L)
virtual const occ::handle< Geom_Curve > &	Curve3D () const
virtual void	Curve3D (const occ::handle< Geom_Curve > &C)
virtual const occ::handle< Geom2d_Curve > &	PCurve2 () const
virtual void	PCurve2 (const occ::handle< Geom2d_Curve > &C)
virtual const occ::handle< Poly_Polygon3D > &	Polygon3D () const
virtual void	Polygon3D (const occ::handle< Poly_Polygon3D > &P)
virtual const occ::handle< Poly_Polygon2D > &	Polygon () const
virtual void	Polygon (const occ::handle< Poly_Polygon2D > &P)
virtual const occ::handle< Poly_Polygon2D > &	Polygon2 () const
virtual void	Polygon2 (const occ::handle< Poly_Polygon2D > &P)
virtual const occ::handle< Poly_Triangulation > &	Triangulation () const
virtual const occ::handle< Poly_PolygonOnTriangulation > &	PolygonOnTriangulation () const
virtual void	PolygonOnTriangulation (const occ::handle< Poly_PolygonOnTriangulation > &P)
virtual const occ::handle< Poly_PolygonOnTriangulation > &	PolygonOnTriangulation2 () const
virtual void	PolygonOnTriangulation2 (const occ::handle< Poly_PolygonOnTriangulation > &P2)
virtual const occ::handle< Geom_Surface > &	Surface2 () const
virtual const TopLoc_Location &	Location2 () const
virtual const GeomAbs_Shape &	Continuity () const
virtual void	Continuity (const GeomAbs_Shape C)
Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.
	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.
Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.
virtual	~Standard_Transient ()=default
	Destructor must be virtual.
virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.
bool	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.
bool	IsInstance (const char *const theTypeName) const
	Returns a true value if this is an instance of TypeName.
bool	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
bool	IsKind (const char *const theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.
int	GetRefCount () const noexcept
	Get the reference counter of this object.
void	IncrementRefCounter () noexcept
	Increments the reference counter of this object. Uses relaxed memory ordering since incrementing only requires atomicity, not synchronization with other memory operations.
int	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value. Uses release ordering for the decrement to ensure all writes to the object are visible before the count reaches zero. An acquire fence is added only when the count reaches zero, ensuring proper synchronization before deletion. This is more efficient than using acq_rel for every decrement.
virtual void	Delete () const
	Memory deallocator for transient classes.

Protected Attributes
gp_Pnt2d	myUV1
gp_Pnt2d	myUV2
Protected Attributes inherited from BRep_CurveRepresentation
TopLoc_Location	myLocation

Additional Inherited Members
typedef void	base_type
	Returns a type descriptor about this object.
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.
static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.
Protected Member Functions inherited from BRep_GCurve
	BRep_GCurve (const TopLoc_Location &L, const double First, const double Last)
Protected Member Functions inherited from BRep_CurveRepresentation
	BRep_CurveRepresentation (const TopLoc_Location &L)

Detailed Description

Representation of a curve by a curve in the parametric space of a surface.

Constructor & Destructor Documentation

◆ BRep_CurveOnSurface()

BRep_CurveOnSurface::BRep_CurveOnSurface	(	const occ::handle< Geom2d_Curve > &	PC,
		const occ::handle< Geom_Surface > &	S,
		const TopLoc_Location &	L )

Member Function Documentation

◆ Copy()

occ::handle< BRep_CurveRepresentation > BRep_CurveOnSurface::Copy ( ) const

overridevirtual

Return a copy of this representation.

Implements BRep_CurveRepresentation.

◆ D0()

void BRep_CurveOnSurface::D0	(	const double	U,
		gp_Pnt &	P ) const

overridevirtual

Computes the point at parameter U.

Implements BRep_GCurve.

◆ DumpJson()

void BRep_CurveOnSurface::DumpJson	(	Standard_OStream &	theOStream,
		int	theDepth = -1 ) const

overridevirtual

Dumps the content of me into the stream.

Reimplemented from BRep_CurveRepresentation.

◆ IsCurveOnSurface() [1/2]

bool BRep_CurveOnSurface::IsCurveOnSurface ( ) const

overridevirtual

Returns True.

Reimplemented from BRep_CurveRepresentation.

◆ IsCurveOnSurface() [2/2]

bool BRep_CurveOnSurface::IsCurveOnSurface	(	const occ::handle< Geom_Surface > &	S,
		const TopLoc_Location &	L ) const

overridevirtual

A curve in the parametric space of a surface.

Reimplemented from BRep_CurveRepresentation.

◆ PCurve() [1/2]

const occ::handle< Geom2d_Curve > & BRep_CurveOnSurface::PCurve ( ) const

overridevirtual

Reimplemented from BRep_CurveRepresentation.

◆ PCurve() [2/2]

void BRep_CurveOnSurface::PCurve ( const occ::handle< Geom2d_Curve > & C )

overridevirtual

Reimplemented from BRep_CurveRepresentation.

◆ SetUVPoints()

void BRep_CurveOnSurface::SetUVPoints	(	const gp_Pnt2d &	P1,
		const gp_Pnt2d &	P2 )

◆ Surface()

const occ::handle< Geom_Surface > & BRep_CurveOnSurface::Surface ( ) const

overridevirtual

Reimplemented from BRep_CurveRepresentation.

◆ Update()

void BRep_CurveOnSurface::Update ( )

overridevirtual

Recomputes any derived data after a modification. This is called when the range is modified.

Reimplemented from BRep_GCurve.

◆ UVPoints()

void BRep_CurveOnSurface::UVPoints	(	gp_Pnt2d &	P1,
		gp_Pnt2d &	P2 ) const

Field Documentation

◆ myUV1

gp_Pnt2d BRep_CurveOnSurface::myUV1

protected

◆ myUV2

gp_Pnt2d BRep_CurveOnSurface::myUV2

protected

The documentation for this class was generated from the following file:

BRep_CurveOnSurface.hxx

Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ BRep_CurveOnSurface()

Member Function Documentation

◆ Copy()

◆ D0()

◆ DumpJson()

◆ IsCurveOnSurface() [1/2]

◆ IsCurveOnSurface() [2/2]

◆ PCurve() [1/2]

◆ PCurve() [2/2]

◆ SetUVPoints()

◆ Surface()

◆ Update()

◆ UVPoints()

Field Documentation

◆ myUV1

◆ myUV2