BRep_TEdge Class Reference

The TEdge from BRep is inherited from the TEdge from TopoDS. It contains the geometric data. More...

#include <BRep_TEdge.hxx>

Inheritance diagram for BRep_TEdge:

Public Member Functions
	BRep_TEdge ()
	Creates an empty TEdge.
double	Tolerance () const
void	Tolerance (const double T)
void	UpdateTolerance (const double T)
	Sets the tolerance to the max of <T> and the current tolerance.
bool	SameParameter () const
void	SameParameter (const bool S)
bool	SameRange () const
void	SameRange (const bool S)
bool	Degenerated () const
void	Degenerated (const bool S)
const NCollection_List< occ::handle< BRep_CurveRepresentation > > &	Curves () const
NCollection_List< occ::handle< BRep_CurveRepresentation > > &	ChangeCurves ()
occ::handle< TopoDS_TShape >	EmptyCopy () const override
	Returns a copy of the TShape with no sub-shapes.
void	DumpJson (Standard_OStream &theOStream, int theDepth=-1) const override
	Dumps the content of me into the stream.
Public Member Functions inherited from TopoDS_TEdge
occ::handle< TopoDS_TShape >	EmptyCopy () const override
	Returns an empty TEdge.
Public Member Functions inherited from TopoDS_TShape
bool	Free () const
	Returns the free flag.
void	Free (bool theIsFree)
	Sets the free flag.
bool	Locked () const
	Returns the locked flag.
void	Locked (bool theIsLocked)
	Sets the locked flag.
bool	Modified () const
	Returns the modification flag.
void	Modified (bool theIsModified)
	Sets the modification flag.
bool	Checked () const
	Returns the checked flag.
void	Checked (bool theIsChecked)
	Sets the checked flag.
bool	Orientable () const
	Returns the orientability flag.
void	Orientable (bool theIsOrientable)
	Sets the orientability flag.
bool	Closed () const
	Returns the closedness flag.
void	Closed (bool theIsClosed)
	Sets the closedness flag.
bool	Infinite () const
	Returns the infinity flag.
void	Infinite (bool theIsInfinite)
	Sets the infinity flag.
bool	Convex () const
	Returns the convexness flag.
void	Convex (bool theIsConvex)
	Sets the convexness flag.
TopAbs_ShapeEnum	ShapeType () const
	Returns the type as a term of the ShapeEnum enum: VERTEX, EDGE, WIRE, FACE, SHELL, SOLID, COMPSOLID, COMPOUND. The type is embedded in the lower 4 bits of the state.
int	NbChildren () const
	Returns the number of direct sub-shapes (children).
Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.
	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.
Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.
virtual	~Standard_Transient ()=default
	Destructor must be virtual.
virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.
bool	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.
bool	IsInstance (const char *const theTypeName) const
	Returns a true value if this is an instance of TypeName.
bool	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
bool	IsKind (const char *const theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.
int	GetRefCount () const noexcept
	Get the reference counter of this object.
void	IncrementRefCounter () noexcept
	Increments the reference counter of this object. Uses relaxed memory ordering since incrementing only requires atomicity, not synchronization with other memory operations.
int	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value. Uses release ordering for the decrement to ensure all writes to the object are visible before the count reaches zero. An acquire fence is added only when the count reaches zero, ensuring proper synchronization before deletion. This is more efficient than using acq_rel for every decrement.
virtual void	Delete () const
	Memory deallocator for transient classes.

Additional Inherited Members
Public Types inherited from TopoDS_TShape
enum	BitLayout : uint16_t {   Bits_ShapeType_Mask = 0x000F , Bits_ShapeType_Shift = 0 , Bit_Free = 0x0010 , Bit_Modified = 0x0020 ,   Bit_Checked = 0x0040 , Bit_Orientable = 0x0080 , Bit_Closed = 0x0100 , Bit_Infinite = 0x0200 ,   Bit_Convex = 0x0400 , Bit_Locked = 0x0800 , Bits_Reserved = 0xF000 }
	Bit layout for compact state storage. Bits 0-3 store the TopAbs_ShapeEnum value (0-8). Bits 4-11 store boolean flags. Bits 12-15 are reserved for future use. More...
typedef void	base_type
	Returns a type descriptor about this object.
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.
static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.
Protected Member Functions inherited from TopoDS_TEdge
	TopoDS_TEdge ()
	Construct an edge.
Protected Member Functions inherited from TopoDS_TShape
	TopoDS_TShape (TopAbs_ShapeEnum theType)
	Constructs a TShape with the given shape type. Default flags: Free = true, Modified = true, Orientable = true.
void	setBit (uint16_t theBit, bool theIsOn)
	Set a bit flag.

Detailed Description

The TEdge from BRep is inherited from the TEdge from TopoDS. It contains the geometric data.

The TEdge contains a:

• tolerance.
• same parameter flag.
• same range flag.
• Degenerated flag.
• list of curve representation.

Constructor & Destructor Documentation

BRep_TEdge()

BRep_TEdge::BRep_TEdge

(

)

Creates an empty TEdge.

Member Function Documentation

ChangeCurves()

NCollection_List< occ::handle< BRep_CurveRepresentation > > & BRep_TEdge::ChangeCurves

(

)

Curves()

const NCollection_List< occ::handle< BRep_CurveRepresentation > > & BRep_TEdge::Curves

(

)

const

Degenerated() [1/2]

bool BRep_TEdge::Degenerated

(

)

const

Degenerated() [2/2]

void BRep_TEdge::Degenerated

(

const bool

S

)

DumpJson()

void BRep_TEdge::DumpJson ( Standard_OStream & theOStream, int theDepth = -1 ) const

overridevirtual

Dumps the content of me into the stream.

Reimplemented from TopoDS_TShape.

EmptyCopy()

occ::handle< TopoDS_TShape > BRep_TEdge::EmptyCopy ( ) const

overridevirtual

Returns a copy of the TShape with no sub-shapes.

Implements TopoDS_TShape.

SameParameter() [1/2]

bool BRep_TEdge::SameParameter

(

)

const

SameParameter() [2/2]

void BRep_TEdge::SameParameter

(

const bool

S

)

SameRange() [1/2]

bool BRep_TEdge::SameRange

(

)

const

SameRange() [2/2]

void BRep_TEdge::SameRange

(

const bool

S

)

Tolerance() [1/2]

double BRep_TEdge::Tolerance

(

)

const

Tolerance() [2/2]

void BRep_TEdge::Tolerance

(

const double

T

)

UpdateTolerance()

void BRep_TEdge::UpdateTolerance

(

const double

T

)

Sets the tolerance to the max of <T> and the current tolerance.

---

The documentation for this class was generated from the following file:

• BRep_TEdge.hxx