OCCT 8.0.1
OCCT documentation

Search guides and API reference

Enter at least two characters.

    Open CASCADE Technology Reference Manual 8.0.1
    IntPatch_PointLine Class Referenceabstract

    Definition of an intersection line between two surfaces. A line defined by a set of points (e.g. coming from a walking algorithm) as defined in the class WLine or RLine (Restriction line). More...

    #include <IntPatch_PointLine.hxx>

    Inheritance diagram for IntPatch_PointLine:

    Public Member Functions

    virtual void AddVertex (const IntPatch_Point &Pnt, const bool theIsPrepend=false)=0
     Adds a vertex in the list. If theIsPrepend == TRUE the new vertex will be added before the first element of vertices sequence. Otherwise, to the end of the sequence.
    virtual int NbPnts () const =0
     Returns the number of intersection points.
    virtual int NbVertex () const =0
     Returns number of vertices (IntPatch_Point) of the line.
    virtual const IntSurf_PntOn2S & Point (const int Index) const =0
     Returns the intersection point of range Index.
    virtual const IntPatch_Point & Vertex (const int Index) const =0
     Returns the vertex of range Index on the line.
    virtual IntPatch_Point & ChangeVertex (const int Index)=0
     Returns the vertex of range Index on the line.
    virtual void ClearVertexes ()=0
     Removes vertices from the line.
    virtual void RemoveVertex (const int theIndex)=0
     Removes single vertex from the line.
    virtual occ::handle< IntSurf_LineOn2S > Curve () const =0
     Returns set of intersection points.
    virtual bool IsOutSurf1Box (const gp_Pnt2d &P1) const =0
     Returns TRUE if P1 is out of the box built from the points on 1st surface.
    virtual bool IsOutSurf2Box (const gp_Pnt2d &P2) const =0
     Returns TRUE if P2 is out of the box built from the points on 2nd surface.
    virtual bool IsOutBox (const gp_Pnt &P) const =0
     Returns TRUE if P is out of the box built from 3D-points.
    Public Member Functions inherited from IntPatch_Line
    void SetValue (const bool Uiso1, const bool Viso1, const bool Uiso2, const bool Viso2)
     To set the values returned by IsUIsoS1,.... The default values are False.
    IntPatch_IType ArcType () const
     Returns the type of geometry 3d (Line, Circle, Parabola, Hyperbola, Ellipse, Analytic, Walking, Restriction).
    bool IsTangent () const
     Returns TRUE if the intersection is a line of tangency between the 2 patches.
    IntSurf_TypeTrans TransitionOnS1 () const
     Returns the type of the transition of the line for the first surface. The transition is "constant" along the line. The transition is IN if the line is oriented in such a way that the system of vector (N1,N2,T) is right-handed, where N1 is the normal to the first surface at a point P, N2 is the normal to the second surface at a point P, T is the tangent to the intersection line at P. If the system of vector is left-handed, the transition is OUT. When N1 and N2 are colinear all along the intersection line, the transition will be.
    IntSurf_TypeTrans TransitionOnS2 () const
     Returns the type of the transition of the line for the second surface. The transition is "constant" along the line.
    IntSurf_Situation SituationS1 () const
     Returns the situation (INSIDE/OUTSIDE/UNKNOWN) of the first patch compared to the second one, when TransitionOnS1 or TransitionOnS2 returns TOUCH. Otherwise, an exception is raised.
    IntSurf_Situation SituationS2 () const
     Returns the situation (INSIDE/OUTSIDE/UNKNOWN) of the second patch compared to the first one, when TransitionOnS1 or TransitionOnS2 returns TOUCH. Otherwise, an exception is raised.
    bool IsUIsoOnS1 () const
     Returns TRUE if the intersection is a U isoparametric curve on the first patch.
    bool IsVIsoOnS1 () const
     Returns TRUE if the intersection is a V isoparametric curve on the first patch.
    bool IsUIsoOnS2 () const
     Returns TRUE if the intersection is a U isoparametric curve on the second patch.
    bool IsVIsoOnS2 () const
     Returns TRUE if the intersection is a V isoparametric curve on the second patch.
    Public Member Functions inherited from Standard_Transient
     Standard_Transient ()
     Empty constructor.
     Standard_Transient (const Standard_Transient &)
     Copy constructor – does nothing.
    Standard_Transient & operator= (const Standard_Transient &)
     Assignment operator, needed to avoid copying reference counter.
    virtual ~Standard_Transient ()=default
     Destructor must be virtual.
    virtual const opencascade::handle< Standard_Type > & DynamicType () const
     Returns a type descriptor about this object.
    bool IsInstance (const opencascade::handle< Standard_Type > &theType) const
     Returns a true value if this is an instance of Type.
    bool IsInstance (const char *const theTypeName) const
     Returns a true value if this is an instance of TypeName.
    bool IsKind (const opencascade::handle< Standard_Type > &theType) const
     Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
    bool IsKind (const char *const theTypeName) const
     Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
    Standard_Transient * This () const
     Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.
    int GetRefCount () const noexcept
     Get the reference counter of this object.
    void IncrementRefCounter () noexcept
     Increments the reference counter of this object. Uses relaxed memory ordering since incrementing only requires atomicity, not synchronization with other memory operations.
    int DecrementRefCounter () noexcept
     Decrements the reference counter of this object; returns the decremented value. Uses release ordering for the decrement to ensure all writes to the object are visible before the count reaches zero. An acquire fence is added only when the count reaches zero, ensuring proper synchronization before deletion. This is more efficient than using acq_rel for every decrement.
    virtual void Delete () const
     Memory deallocator for transient classes.

    Static Public Member Functions

    static double CurvatureRadiusOfIntersLine (const occ::handle< Adaptor3d_Surface > &theS1, const occ::handle< Adaptor3d_Surface > &theS2, const IntSurf_PntOn2S &theUVPoint)
     Returns the radius of curvature of the intersection line in given point. Returns negative value if computation is not possible.
    static constexpr const char * get_type_name ()
     Returns a type descriptor about this object.
    static const opencascade::handle< Standard_Type > & get_type_descriptor ()
     Returns type descriptor of Standard_Transient class.

    Protected Member Functions

     IntPatch_PointLine (const bool Tang, const IntSurf_TypeTrans Trans1, const IntSurf_TypeTrans Trans2)
     To initialize the fields, when the transitions are In or Out.
     IntPatch_PointLine (const bool Tang, const IntSurf_Situation Situ1, const IntSurf_Situation Situ2)
     To initialize the fields, when the transitions are Touch.
     IntPatch_PointLine (const bool Tang)
     To initialize the fields, when the transitions are Undecided.
    Protected Member Functions inherited from IntPatch_Line
     IntPatch_Line (const bool Tang, const IntSurf_TypeTrans Trans1, const IntSurf_TypeTrans Trans2)
     To initialize the fields, when the transitions are In or Out.
     IntPatch_Line (const bool Tang, const IntSurf_Situation Situ1, const IntSurf_Situation Situ2)
     To initialize the fields, when the transitions are Touch.
     IntPatch_Line (const bool Tang)
     To initialize the fields, when the transitions are Undecided.

    Additional Inherited Members

    typedef void base_type
     Returns a type descriptor about this object.
    Protected Attributes inherited from IntPatch_Line
    IntPatch_IType typ

    Detailed Description

    Definition of an intersection line between two surfaces. A line defined by a set of points (e.g. coming from a walking algorithm) as defined in the class WLine or RLine (Restriction line).

    Constructor & Destructor Documentation

    ◆ IntPatch_PointLine() [1/3]

    IntPatch_PointLine::IntPatch_PointLine ( const bool Tang,
    const IntSurf_TypeTrans Trans1,
    const IntSurf_TypeTrans Trans2 )
    protected

    To initialize the fields, when the transitions are In or Out.

    ◆ IntPatch_PointLine() [2/3]

    IntPatch_PointLine::IntPatch_PointLine ( const bool Tang,
    const IntSurf_Situation Situ1,
    const IntSurf_Situation Situ2 )
    protected

    To initialize the fields, when the transitions are Touch.

    ◆ IntPatch_PointLine() [3/3]

    IntPatch_PointLine::IntPatch_PointLine ( const bool Tang)
    protected

    To initialize the fields, when the transitions are Undecided.

    Member Function Documentation

    ◆ AddVertex()

    virtual void IntPatch_PointLine::AddVertex ( const IntPatch_Point & Pnt,
    const bool theIsPrepend = false )
    pure virtual

    Adds a vertex in the list. If theIsPrepend == TRUE the new vertex will be added before the first element of vertices sequence. Otherwise, to the end of the sequence.

    Implemented in IntPatch_RLine, and IntPatch_WLine.

    ◆ ChangeVertex()

    virtual IntPatch_Point & IntPatch_PointLine::ChangeVertex ( const int Index)
    pure virtual

    Returns the vertex of range Index on the line.

    Implemented in IntPatch_RLine, and IntPatch_WLine.

    ◆ ClearVertexes()

    virtual void IntPatch_PointLine::ClearVertexes ( )
    pure virtual

    Removes vertices from the line.

    Implemented in IntPatch_RLine, and IntPatch_WLine.

    ◆ CurvatureRadiusOfIntersLine()

    double IntPatch_PointLine::CurvatureRadiusOfIntersLine ( const occ::handle< Adaptor3d_Surface > & theS1,
    const occ::handle< Adaptor3d_Surface > & theS2,
    const IntSurf_PntOn2S & theUVPoint )
    static

    Returns the radius of curvature of the intersection line in given point. Returns negative value if computation is not possible.

    ◆ Curve()

    virtual occ::handle< IntSurf_LineOn2S > IntPatch_PointLine::Curve ( ) const
    pure virtual

    Returns set of intersection points.

    Implemented in IntPatch_RLine, and IntPatch_WLine.

    ◆ IsOutBox()

    virtual bool IntPatch_PointLine::IsOutBox ( const gp_Pnt & P) const
    pure virtual

    Returns TRUE if P is out of the box built from 3D-points.

    Implemented in IntPatch_RLine, and IntPatch_WLine.

    ◆ IsOutSurf1Box()

    virtual bool IntPatch_PointLine::IsOutSurf1Box ( const gp_Pnt2d & P1) const
    pure virtual

    Returns TRUE if P1 is out of the box built from the points on 1st surface.

    Implemented in IntPatch_RLine, and IntPatch_WLine.

    ◆ IsOutSurf2Box()

    virtual bool IntPatch_PointLine::IsOutSurf2Box ( const gp_Pnt2d & P2) const
    pure virtual

    Returns TRUE if P2 is out of the box built from the points on 2nd surface.

    Implemented in IntPatch_RLine, and IntPatch_WLine.

    ◆ NbPnts()

    virtual int IntPatch_PointLine::NbPnts ( ) const
    pure virtual

    Returns the number of intersection points.

    Implemented in IntPatch_RLine, and IntPatch_WLine.

    ◆ NbVertex()

    virtual int IntPatch_PointLine::NbVertex ( ) const
    pure virtual

    Returns number of vertices (IntPatch_Point) of the line.

    Implemented in IntPatch_RLine, and IntPatch_WLine.

    ◆ Point()

    virtual const IntSurf_PntOn2S & IntPatch_PointLine::Point ( const int Index) const
    pure virtual

    Returns the intersection point of range Index.

    Implemented in IntPatch_RLine, and IntPatch_WLine.

    ◆ RemoveVertex()

    virtual void IntPatch_PointLine::RemoveVertex ( const int theIndex)
    pure virtual

    Removes single vertex from the line.

    Implemented in IntPatch_RLine, and IntPatch_WLine.

    ◆ Vertex()

    virtual const IntPatch_Point & IntPatch_PointLine::Vertex ( const int Index) const
    pure virtual

    Returns the vertex of range Index on the line.

    Implemented in IntPatch_RLine, and IntPatch_WLine.


    The documentation for this class was generated from the following file: