Set of the methods useful for the MAT's computation. Tool2d contains the geometry of the bisecting locus. More...

#include <MAT2d_Tool2d.hxx>

Public Member Functions
	MAT2d_Tool2d ()
	Empty Constructor.
void	Sense (const MAT_Side aside)
	<aSide> defines the side of the computation of the map.
void	SetJoinType (const GeomAbs_JoinType aJoinType)
void	InitItems (const occ::handle< MAT2d_Circuit > &aCircuit)
	InitItems cuts the line in Items. this Items are the geometrics representations of the BasicElts from MAT.
int	NumberOfItems () const
	Returns the Number of Items .
double	ToleranceOfConfusion () const
	Returns tolerance to test the confusion of two points.
int	FirstPoint (const int anitem, double &dist)
	Creates the point at the origin of the bisector between anitem and the previous item. dist is the distance from the FirstPoint to <anitem>. Returns the index of this point in <theGeomPnts>.
int	TangentBefore (const int anitem, const bool IsOpenResult)
	Creates the Tangent at the end of the Item defined by <anitem>. Returns the index of this vector in <theGeomVecs>.
int	TangentAfter (const int anitem, const bool IsOpenResult)
	Creates the Reversed Tangent at the origin of the Item defined by <anitem>. Returns the index of this vector in <theGeomVecs>.
int	Tangent (const int bisector)
	Creates the Tangent at the end of the bisector defined by <bisector>. Returns the index of this vector in <theGeomVecs>.
void	CreateBisector (const occ::handle< MAT_Bisector > &abisector)
	Creates the geometric bisector defined by <abisector>.
bool	TrimBisector (const occ::handle< MAT_Bisector > &abisector)
	Trims the geometric bisector by the <firstparameter> of <abisector>. If the parameter is out of the bisector, Return FALSE. else Return True.
bool	TrimBisector (const occ::handle< MAT_Bisector > &abisector, const int apoint)
	Trims the geometric bisector by the point of index <apoint> in <theGeomPnts>. If the point is out of the bisector, Return FALSE. else Return True.
double	IntersectBisector (const occ::handle< MAT_Bisector > &bisectorone, const occ::handle< MAT_Bisector > &bisectortwo, int &intpnt)
	Computes the point of intersection between the bisectors defined by <bisectorone> and <bisectortwo> . If this point exists, <intpnt> is its index in <theGeomPnts> and Return the distance of the point from the bisector else Return <RealLast>.
double	Distance (const occ::handle< MAT_Bisector > &abisector, const double param1, const double param2) const
	Returns the distance between the two points designed by their parameters on <abisector>.
void	Dump (const int bisector, const int erease) const
	displays information about the bisector defined by <bisector>.
const Bisector_Bisec &	GeomBis (const int Index) const
	Returns the <Bisec> of index <Index> in <theGeomBisectors>.
occ::handle< Geom2d_Geometry >	GeomElt (const int Index) const
	Returns the Geometry of index <Index> in <theGeomElts>.
const gp_Pnt2d &	GeomPnt (const int Index) const
	Returns the point of index <Index> in the <theGeomPnts>.
const gp_Vec2d &	GeomVec (const int Index) const
	Returns the vector of index <Index> in the <theGeomVecs>.
occ::handle< MAT2d_Circuit >	Circuit () const
void	BisecFusion (const int Index1, const int Index2)
Bisector_Bisec &	ChangeGeomBis (const int Index)
	Returns the <Bisec> of index <Index> in <theGeomBisectors>.

Detailed Description

Set of the methods useful for the MAT's computation. Tool2d contains the geometry of the bisecting locus.

Constructor & Destructor Documentation

◆ MAT2d_Tool2d()

MAT2d_Tool2d::MAT2d_Tool2d ( )

Empty Constructor.

Member Function Documentation

◆ BisecFusion()

void MAT2d_Tool2d::BisecFusion	(	const int	Index1,
		const int	Index2 )

◆ ChangeGeomBis()

Bisector_Bisec & MAT2d_Tool2d::ChangeGeomBis ( const int Index )

Returns the <Bisec> of index <Index> in <theGeomBisectors>.

◆ Circuit()

occ::handle< MAT2d_Circuit > MAT2d_Tool2d::Circuit ( ) const

◆ CreateBisector()

void MAT2d_Tool2d::CreateBisector ( const occ::handle< MAT_Bisector > & abisector )

Creates the geometric bisector defined by <abisector>.

◆ Distance()

double MAT2d_Tool2d::Distance	(	const occ::handle< MAT_Bisector > &	abisector,
		const double	param1,
		const double	param2 ) const

Returns the distance between the two points designed by their parameters on <abisector>.

◆ Dump()

void MAT2d_Tool2d::Dump	(	const int	bisector,
		const int	erease ) const

displays information about the bisector defined by <bisector>.

◆ FirstPoint()

int MAT2d_Tool2d::FirstPoint	(	const int	anitem,
		double &	dist )

Creates the point at the origin of the bisector between anitem and the previous item. dist is the distance from the FirstPoint to <anitem>. Returns the index of this point in <theGeomPnts>.

◆ GeomBis()

const Bisector_Bisec & MAT2d_Tool2d::GeomBis ( const int Index ) const

Returns the <Bisec> of index <Index> in <theGeomBisectors>.

◆ GeomElt()

occ::handle< Geom2d_Geometry > MAT2d_Tool2d::GeomElt ( const int Index ) const

Returns the Geometry of index <Index> in <theGeomElts>.

◆ GeomPnt()

const gp_Pnt2d & MAT2d_Tool2d::GeomPnt ( const int Index ) const

Returns the point of index <Index> in the <theGeomPnts>.

◆ GeomVec()

const gp_Vec2d & MAT2d_Tool2d::GeomVec ( const int Index ) const

Returns the vector of index <Index> in the <theGeomVecs>.

◆ InitItems()

void MAT2d_Tool2d::InitItems ( const occ::handle< MAT2d_Circuit > & aCircuit )

InitItems cuts the line in Items. this Items are the geometrics representations of the BasicElts from MAT.

◆ IntersectBisector()

double MAT2d_Tool2d::IntersectBisector	(	const occ::handle< MAT_Bisector > &	bisectorone,
		const occ::handle< MAT_Bisector > &	bisectortwo,
		int &	intpnt )

Computes the point of intersection between the bisectors defined by <bisectorone> and <bisectortwo> . If this point exists, <intpnt> is its index in <theGeomPnts> and Return the distance of the point from the bisector else Return <RealLast>.

◆ NumberOfItems()

int MAT2d_Tool2d::NumberOfItems ( ) const

Returns the Number of Items .

◆ Sense()

void MAT2d_Tool2d::Sense ( const MAT_Side aside )

<aSide> defines the side of the computation of the map.

◆ SetJoinType()

void MAT2d_Tool2d::SetJoinType ( const GeomAbs_JoinType aJoinType )

◆ Tangent()

int MAT2d_Tool2d::Tangent ( const int bisector )

Creates the Tangent at the end of the bisector defined by <bisector>. Returns the index of this vector in <theGeomVecs>.

◆ TangentAfter()

int MAT2d_Tool2d::TangentAfter	(	const int	anitem,
		const bool	IsOpenResult )

Creates the Reversed Tangent at the origin of the Item defined by <anitem>. Returns the index of this vector in <theGeomVecs>.

◆ TangentBefore()

int MAT2d_Tool2d::TangentBefore	(	const int	anitem,
		const bool	IsOpenResult )

Creates the Tangent at the end of the Item defined by <anitem>. Returns the index of this vector in <theGeomVecs>.

◆ ToleranceOfConfusion()

double MAT2d_Tool2d::ToleranceOfConfusion ( ) const

Returns tolerance to test the confusion of two points.

◆ TrimBisector() [1/2]

bool MAT2d_Tool2d::TrimBisector ( const occ::handle< MAT_Bisector > & abisector )

Trims the geometric bisector by the <firstparameter> of <abisector>. If the parameter is out of the bisector, Return FALSE. else Return True.

◆ TrimBisector() [2/2]

bool MAT2d_Tool2d::TrimBisector	(	const occ::handle< MAT_Bisector > &	abisector,
		const int	apoint )

Trims the geometric bisector by the point of index <apoint> in <theGeomPnts>. If the point is out of the bisector, Return FALSE. else Return True.

The documentation for this class was generated from the following file:

MAT2d_Tool2d.hxx

Public Member Functions