#include <ShapeAlgo_AlgoContainer.hxx>

Inheritance diagram for ShapeAlgo_AlgoContainer:

Public Member Functions
	ShapeAlgo_AlgoContainer ()
	Empty constructor.
void	SetToolContainer (const occ::handle< ShapeAlgo_ToolContainer > &TC)
	Sets ToolContainer.
occ::handle< ShapeAlgo_ToolContainer >	ToolContainer () const
	Returns ToolContainer.
virtual bool	ConnectNextWire (const occ::handle< ShapeAnalysis_Wire > &saw, const occ::handle< ShapeExtend_WireData > &nextsewd, const double maxtol, double &distmin, bool &revsewd, bool &revnextsewd) const
	Finds the best way to connect and connects <nextsewd> to already built <sewd> (in <saw>). Returns False if <nextsewd> cannot be connected, otherwise - True. <maxtol> specifies the maximum tolerance with which <nextsewd> can be added. <distmin> is used to receive the minimum distance between <nextsewd> and <sewd>. <revsewd> is True if <sewd> has been reversed before connecting. <revnextwd> is True if <nextsewd> has been reversed before connecting. Uses functionality of ShapeAnalysis_Wire.
virtual void	ApproxBSplineCurve (const occ::handle< Geom_BSplineCurve > &bspline, NCollection_Sequence< occ::handle< Geom_Curve > > &seq) const
virtual void	ApproxBSplineCurve (const occ::handle< Geom2d_BSplineCurve > &bspline, NCollection_Sequence< occ::handle< Geom2d_Curve > > &seq) const
virtual bool	C0BSplineToSequenceOfC1BSplineCurve (const occ::handle< Geom_BSplineCurve > &BS, occ::handle< NCollection_HSequence< occ::handle< Geom_BoundedCurve > > > &seqBS) const
virtual bool	C0BSplineToSequenceOfC1BSplineCurve (const occ::handle< Geom2d_BSplineCurve > &BS, occ::handle< NCollection_HSequence< occ::handle< Geom2d_BoundedCurve > > > &seqBS) const
	Converts C0 B-Spline curve into sequence of C1 B-Spline curves. Calls ShapeUpgrade::C0BSplineToSequenceOfC1BSplineCurve.
virtual TopoDS_Shape	C0ShapeToC1Shape (const TopoDS_Shape &shape, const double tol) const
	Converts a shape on C0 geometry into the shape on C1 geometry.
virtual occ::handle< Geom_BSplineSurface >	ConvertSurfaceToBSpline (const occ::handle< Geom_Surface > &surf, const double UF, const double UL, const double VF, const double VL) const
	Converts a surface to B-Spline. Uses ShapeConstruct.
virtual bool	HomoWires (const TopoDS_Wire &wireIn1, const TopoDS_Wire &wireIn2, TopoDS_Wire &wireOut1, TopoDS_Wire &wireOut2, const bool byParam) const
	Return 2 wires with the same number of edges. The both Edges number i of these wires have got the same ratio between theirs parameter lengths and their wire parameter lengths.
virtual TopoDS_Wire	OuterWire (const TopoDS_Face &faceface) const
	Returns the outer wire on the face <Face>.
virtual occ::handle< Geom_Surface >	ConvertToPeriodic (const occ::handle< Geom_Surface > &surf) const
	Converts surface to periodic form. Calls ShapeCustom_Surface.
virtual void	GetFaceUVBounds (const TopoDS_Face &F, double &Umin, double &Umax, double &Vmin, double &Vmax) const
	Computes exact UV bounds of all wires on the face.
virtual occ::handle< Geom_BSplineCurve >	ConvertCurveToBSpline (const occ::handle< Geom_Curve > &C3D, const double First, const double Last, const double Tol3d, const GeomAbs_Shape Continuity, const int MaxSegments, const int MaxDegree) const
	Convert Geom_Curve to Geom_BSplineCurve.
Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.
	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.
Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.
virtual	~Standard_Transient ()=default
	Destructor must be virtual.
virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.
bool	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.
bool	IsInstance (const char *const theTypeName) const
	Returns a true value if this is an instance of TypeName.
bool	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
bool	IsKind (const char *const theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.
int	GetRefCount () const noexcept
	Get the reference counter of this object.
void	IncrementRefCounter () noexcept
	Increments the reference counter of this object. Uses relaxed memory ordering since incrementing only requires atomicity, not synchronization with other memory operations.
int	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value. Uses release ordering for the decrement to ensure all writes to the object are visible before the count reaches zero. An acquire fence is added only when the count reaches zero, ensuring proper synchronization before deletion. This is more efficient than using acq_rel for every decrement.
virtual void	Delete () const
	Memory deallocator for transient classes.

Additional Inherited Members
typedef void	base_type
	Returns a type descriptor about this object.
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.
static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Constructor & Destructor Documentation

◆ ShapeAlgo_AlgoContainer()

ShapeAlgo_AlgoContainer::ShapeAlgo_AlgoContainer ( )

Empty constructor.

Member Function Documentation

◆ ApproxBSplineCurve() [1/2]

virtual void ShapeAlgo_AlgoContainer::ApproxBSplineCurve	(	const occ::handle< Geom2d_BSplineCurve > &	bspline,
		NCollection_Sequence< occ::handle< Geom2d_Curve > > &	seq ) const

virtual

◆ ApproxBSplineCurve() [2/2]

virtual void ShapeAlgo_AlgoContainer::ApproxBSplineCurve	(	const occ::handle< Geom_BSplineCurve > &	bspline,
		NCollection_Sequence< occ::handle< Geom_Curve > > &	seq ) const

virtual

◆ C0BSplineToSequenceOfC1BSplineCurve() [1/2]

virtual bool ShapeAlgo_AlgoContainer::C0BSplineToSequenceOfC1BSplineCurve	(	const occ::handle< Geom2d_BSplineCurve > &	BS,
		occ::handle< NCollection_HSequence< occ::handle< Geom2d_BoundedCurve > > > &	seqBS ) const

virtual

Converts C0 B-Spline curve into sequence of C1 B-Spline curves. Calls ShapeUpgrade::C0BSplineToSequenceOfC1BSplineCurve.

◆ C0BSplineToSequenceOfC1BSplineCurve() [2/2]

virtual bool ShapeAlgo_AlgoContainer::C0BSplineToSequenceOfC1BSplineCurve	(	const occ::handle< Geom_BSplineCurve > &	BS,
		occ::handle< NCollection_HSequence< occ::handle< Geom_BoundedCurve > > > &	seqBS ) const

virtual

◆ C0ShapeToC1Shape()

virtual TopoDS_Shape ShapeAlgo_AlgoContainer::C0ShapeToC1Shape	(	const TopoDS_Shape &	shape,
		const double	tol ) const

virtual

Converts a shape on C0 geometry into the shape on C1 geometry.

◆ ConnectNextWire()

virtual bool ShapeAlgo_AlgoContainer::ConnectNextWire	(	const occ::handle< ShapeAnalysis_Wire > &	saw,
		const occ::handle< ShapeExtend_WireData > &	nextsewd,
		const double	maxtol,
		double &	distmin,
		bool &	revsewd,
		bool &	revnextsewd ) const

virtual

Finds the best way to connect and connects <nextsewd> to already built <sewd> (in <saw>). Returns False if <nextsewd> cannot be connected, otherwise - True. <maxtol> specifies the maximum tolerance with which <nextsewd> can be added. <distmin> is used to receive the minimum distance between <nextsewd> and <sewd>. <revsewd> is True if <sewd> has been reversed before connecting. <revnextwd> is True if <nextsewd> has been reversed before connecting. Uses functionality of ShapeAnalysis_Wire.

◆ ConvertCurveToBSpline()

virtual occ::handle< Geom_BSplineCurve > ShapeAlgo_AlgoContainer::ConvertCurveToBSpline	(	const occ::handle< Geom_Curve > &	C3D,
		const double	First,
		const double	Last,
		const double	Tol3d,
		const GeomAbs_Shape	Continuity,
		const int	MaxSegments,
		const int	MaxDegree ) const

virtual

Convert Geom_Curve to Geom_BSplineCurve.

◆ ConvertSurfaceToBSpline()

virtual occ::handle< Geom_BSplineSurface > ShapeAlgo_AlgoContainer::ConvertSurfaceToBSpline	(	const occ::handle< Geom_Surface > &	surf,
		const double	UF,
		const double	UL,
		const double	VF,
		const double	VL ) const

virtual

Converts a surface to B-Spline. Uses ShapeConstruct.

◆ ConvertToPeriodic()

virtual occ::handle< Geom_Surface > ShapeAlgo_AlgoContainer::ConvertToPeriodic ( const occ::handle< Geom_Surface > & surf ) const

virtual

Converts surface to periodic form. Calls ShapeCustom_Surface.

◆ GetFaceUVBounds()

virtual void ShapeAlgo_AlgoContainer::GetFaceUVBounds	(	const TopoDS_Face &	F,
		double &	Umin,
		double &	Umax,
		double &	Vmin,
		double &	Vmax ) const

virtual

Computes exact UV bounds of all wires on the face.

◆ HomoWires()

virtual bool ShapeAlgo_AlgoContainer::HomoWires	(	const TopoDS_Wire &	wireIn1,
		const TopoDS_Wire &	wireIn2,
		TopoDS_Wire &	wireOut1,
		TopoDS_Wire &	wireOut2,
		const bool	byParam ) const

virtual

Return 2 wires with the same number of edges. The both Edges number i of these wires have got the same ratio between theirs parameter lengths and their wire parameter lengths.

◆ OuterWire()

virtual TopoDS_Wire ShapeAlgo_AlgoContainer::OuterWire ( const TopoDS_Face & face ) const

virtual

Returns the outer wire on the face <Face>.

◆ SetToolContainer()

void ShapeAlgo_AlgoContainer::SetToolContainer ( const occ::handle< ShapeAlgo_ToolContainer > & TC )

Sets ToolContainer.

◆ ToolContainer()

occ::handle< ShapeAlgo_ToolContainer > ShapeAlgo_AlgoContainer::ToolContainer ( ) const

Returns ToolContainer.

The documentation for this class was generated from the following file:

ShapeAlgo_AlgoContainer.hxx

Public Member Functions

Additional Inherited Members

Constructor & Destructor Documentation

◆ ShapeAlgo_AlgoContainer()

Member Function Documentation

◆ ApproxBSplineCurve() [1/2]

◆ ApproxBSplineCurve() [2/2]

◆ C0BSplineToSequenceOfC1BSplineCurve() [1/2]

◆ C0BSplineToSequenceOfC1BSplineCurve() [2/2]

◆ C0ShapeToC1Shape()

◆ ConnectNextWire()

◆ ConvertCurveToBSpline()

◆ ConvertSurfaceToBSpline()

◆ ConvertToPeriodic()

◆ GetFaceUVBounds()

◆ HomoWires()

◆ OuterWire()

◆ SetToolContainer()

◆ ToolContainer()