implements a modification for the BRepTools Modifier algorithm. Will redress indirect surfaces. More...

#include <ShapeCustom_DirectModification.hxx>

Inheritance diagram for ShapeCustom_DirectModification:

[legend]

Public Member Functions
	ShapeCustom_DirectModification ()
bool	NewSurface (const TopoDS_Face &F, occ::handle< Geom_Surface > &S, TopLoc_Location &L, double &Tol, bool &RevWires, bool &RevFace) override
	Returns true if the face <F> has been modified. In this case, ~~is the new geometric support of the face, <L> the new location, <Tol> the new tolerance. Otherwise, returns false, and ~~, <L>, <Tol> are not significant.~~~~
bool	NewCurve (const TopoDS_Edge &E, occ::handle< Geom_Curve > &C, TopLoc_Location &L, double &Tol) override
	Returns true if the edge <E> has been modified. In this case, `is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance. Otherwise, returns false, and , <L>, <Tol> are not significant.`
bool	NewPoint (const TopoDS_Vertex &V, gp_Pnt &P, double &Tol) override
	Returns true if the vertex <V> has been modified. In this case,.
bool	NewCurve2d (const TopoDS_Edge &E, const TopoDS_Face &F, const TopoDS_Edge &NewE, const TopoDS_Face &NewF, occ::handle< Geom2d_Curve > &C, double &Tol) override
	Returns true if the edge <E> has a new curve on surface on the face <F>.In this case, `is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance.`
bool	NewParameter (const TopoDS_Vertex &V, const TopoDS_Edge &E, double &P, double &Tol) override
	Returns true if the Vertex <V> has a new parameter on the edge <E>. In this case,.
GeomAbs_Shape	Continuity (const TopoDS_Edge &E, const TopoDS_Face &F1, const TopoDS_Face &F2, const TopoDS_Edge &NewE, const TopoDS_Face &NewF1, const TopoDS_Face &NewF2) override
	Returns the continuity of <NewE> between <NewF1> and <NewF2>.
Public Member Functions inherited from ShapeCustom_Modification
virtual void	SetMsgRegistrator (const occ::handle< ShapeExtend_BasicMsgRegistrator > &msgreg)
	Sets message registrator.
occ::handle< ShapeExtend_BasicMsgRegistrator >	MsgRegistrator () const
	Returns message registrator.
void	SendMsg (const TopoDS_Shape &shape, const Message_Msg &messagemessage, const Message_Gravity gravity=Message_Info) const
	Sends a message to be attached to the shape. Calls corresponding message of message registrator.
Public Member Functions inherited from BRepTools_Modification
virtual bool	NewTriangulation (const TopoDS_Face &F, occ::handle< Poly_Triangulation > &T)
	Returns true if the face has been modified according to changed triangulation. If the face has been modified:
virtual bool	NewPolygon (const TopoDS_Edge &E, occ::handle< Poly_Polygon3D > &P)
	Returns true if the edge has been modified according to changed polygon. If the edge has been modified:
virtual bool	NewPolygonOnTriangulation (const TopoDS_Edge &E, const TopoDS_Face &F, occ::handle< Poly_PolygonOnTriangulation > &P)
	Returns true if the edge has been modified according to changed polygon on triangulation. If the edge has been modified:
Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.
	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.
Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.
virtual	~Standard_Transient ()=default
	Destructor must be virtual.
virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.
bool	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.
bool	IsInstance (const char *const theTypeName) const
	Returns a true value if this is an instance of TypeName.
bool	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
bool	IsKind (const char *const theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.
int	GetRefCount () const noexcept
	Get the reference counter of this object.
void	IncrementRefCounter () noexcept
	Increments the reference counter of this object. Uses relaxed memory ordering since incrementing only requires atomicity, not synchronization with other memory operations.
int	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value. Uses release ordering for the decrement to ensure all writes to the object are visible before the count reaches zero. An acquire fence is added only when the count reaches zero, ensuring proper synchronization before deletion. This is more efficient than using acq_rel for every decrement.
virtual void	Delete () const
	Memory deallocator for transient classes.

Additional Inherited Members
typedef void	base_type
	Returns a type descriptor about this object.
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.
static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Detailed Description

implements a modification for the BRepTools Modifier algorithm. Will redress indirect surfaces.

Constructor & Destructor Documentation

◆ ShapeCustom_DirectModification()

ShapeCustom_DirectModification::ShapeCustom_DirectModification ( )

Member Function Documentation

◆ Continuity()

GeomAbs_Shape ShapeCustom_DirectModification::Continuity	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F1,
		const TopoDS_Face &	F2,
		const TopoDS_Edge &	NewE,
		const TopoDS_Face &	NewF1,
		const TopoDS_Face &	NewF2 )

overridevirtual

Returns the continuity of <NewE> between <NewF1> and <NewF2>.

<NewE> is the new edge created from <E>. <NewF1> (resp. <NewF2>) is the new face created from <F1> (resp. <F2>).

Implements BRepTools_Modification.

◆ NewCurve()

bool ShapeCustom_DirectModification::NewCurve	(	const TopoDS_Edge &	E,
		occ::handle< Geom_Curve > &	C,
		TopLoc_Location &	L,
		double &	Tol )

overridevirtual

Returns true if the edge <E> has been modified. In this case, is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance. Otherwise, returns false, and , <L>, <Tol> are not significant.

Implements BRepTools_Modification.

◆ NewCurve2d()

bool ShapeCustom_DirectModification::NewCurve2d	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F,
		const TopoDS_Edge &	NewE,
		const TopoDS_Face &	NewF,
		occ::handle< Geom2d_Curve > &	C,
		double &	Tol )

overridevirtual

Returns true if the edge <E> has a new curve on surface on the face <F>.In this case, is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance.

Otherwise, returns false, and , <L>, <Tol> are not significant.

<NewE> is the new edge created from <E>. <NewF> is the new face created from <F>. They may be useful.

Implements BRepTools_Modification.

◆ NewParameter()

bool ShapeCustom_DirectModification::NewParameter	(	const TopoDS_Vertex &	V,
		const TopoDS_Edge &	E,
		double &	P,
		double &	Tol )

overridevirtual

Returns true if the Vertex <V> has a new parameter on the edge <E>. In this case,.

is the parameter, <Tol> the new tolerance. Otherwise, returns false, and

, <Tol> are not significant.

Implements BRepTools_Modification.

◆ NewPoint()

bool ShapeCustom_DirectModification::NewPoint	(	const TopoDS_Vertex &	V,
		gp_Pnt &	P,
		double &	Tol )

overridevirtual

Returns true if the vertex <V> has been modified. In this case,.

is the new geometric support of the vertex, <Tol> the new tolerance. Otherwise, returns false, and

, <Tol> are not significant.

Implements BRepTools_Modification.

◆ NewSurface()

bool ShapeCustom_DirectModification::NewSurface	(	const TopoDS_Face &	F,
		occ::handle< Geom_Surface > &	S,
		TopLoc_Location &	L,
		double &	Tol,
		bool &	RevWires,
		bool &	RevFace )

overridevirtual

Returns true if the face <F> has been modified. In this case, ~~is the new geometric support of the face, <L> the new location, <Tol> the new tolerance. Otherwise, returns false, and ~~, <L>, <Tol> are not significant.~~~~

Implements BRepTools_Modification.

The documentation for this class was generated from the following file:

ShapeCustom_DirectModification.hxx

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ShapeCustom_DirectModification()

Member Function Documentation

◆ Continuity()

◆ NewCurve()

◆ NewCurve2d()

◆ NewParameter()

◆ NewPoint()

◆ NewSurface()