Build a draft surface along a wire. More...

#include <BRepOffsetAPI_MakeDraft.hxx>

Inheritance diagram for BRepOffsetAPI_MakeDraft:

[legend]

Public Member Functions
	BRepOffsetAPI_MakeDraft (const TopoDS_Shape &Shape, const gp_Dir &Dir, const double Angle)
	Constructs the draft surface object defined by the shape Shape, the direction Dir, and the angle Angle. Shape must be a TopoDS_Wire, Topo_DS_Face or TopoDS_Shell with free boundaries. Exceptions Standard_NotDone if Shape is not a TopoDS_Wire, Topo_DS_Face or TopoDS_Shell with free boundaries.
void	SetOptions (const BRepBuilderAPI_TransitionMode Style=BRepBuilderAPI_RightCorner, const double AngleMin=0.01, const double AngleMax=3.0)
	Sets the options of this draft tool. If a transition has to be performed, it can be defined by the mode Style as RightCorner or RoundCorner, RightCorner being a corner defined by a sharp angle, and RoundCorner being a rounded corner. AngleMin is an angular tolerance used to detect whether a transition has to be performed or not. AngleMax sets the maximum value within which a RightCorner transition can be performed. AngleMin and AngleMax are expressed in radians.
void	SetDraft (const bool IsInternal=false)
	Sets the direction of the draft for this object. If IsInternal is true, the draft is internal to the argument Shape used in the constructor.
void	Perform (const double LengthMax)
	Performs the draft using the length LengthMax as the maximum length for the corner edge between two draft faces.
void	Perform (const occ::handle< Geom_Surface > &Surface, const bool KeepInsideSurface=true)
	Performs the draft up to the surface Surface. If KeepInsideSurface is true, the part of Surface inside the draft is kept in the result.
void	Perform (const TopoDS_Shape &StopShape, const bool KeepOutSide=true)
	Performs the draft up to the shape StopShape. If KeepOutSide is true, the part of StopShape which is outside the Draft is kept in the result.
TopoDS_Shell	Shell () const
	Returns the shell resulting from performance of the draft along the wire.
const NCollection_List< TopoDS_Shape > &	Generated (const TopoDS_Shape &S) override
	Returns the list of shapes generated from the shape .
Public Member Functions inherited from BRepBuilderAPI_MakeShape
virtual void	Build (const Message_ProgressRange &theRange=Message_ProgressRange())
	This is called by Shape(). It does nothing but may be redefined.
virtual const TopoDS_Shape &	Shape ()
	Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built.
	operator TopoDS_Shape ()
virtual const NCollection_List< TopoDS_Shape > &	Modified (const TopoDS_Shape &S)
	Returns the list of shapes modified from the shape .
virtual bool	IsDeleted (const TopoDS_Shape &S)
	Returns true if the shape S has been deleted.
Public Member Functions inherited from BRepBuilderAPI_Command
virtual	~BRepBuilderAPI_Command ()
virtual bool	IsDone () const
void	Check () const
	Raises NotDone if done is false.

Additional Inherited Members
Protected Member Functions inherited from BRepBuilderAPI_MakeShape
	BRepBuilderAPI_MakeShape ()
Protected Member Functions inherited from BRepBuilderAPI_Command
	BRepBuilderAPI_Command ()
	Set done to False.
void	Done ()
	Set done to true.
void	NotDone ()
	Set done to false.
Protected Attributes inherited from BRepBuilderAPI_MakeShape
TopoDS_Shape	myShape
NCollection_List< TopoDS_Shape >	myGenerated

Detailed Description

Build a draft surface along a wire.

Constructor & Destructor Documentation

◆ BRepOffsetAPI_MakeDraft()

BRepOffsetAPI_MakeDraft::BRepOffsetAPI_MakeDraft	(	const TopoDS_Shape &	Shape,
		const gp_Dir &	Dir,
		const double	Angle )

Constructs the draft surface object defined by the shape Shape, the direction Dir, and the angle Angle. Shape must be a TopoDS_Wire, Topo_DS_Face or TopoDS_Shell with free boundaries. Exceptions Standard_NotDone if Shape is not a TopoDS_Wire, Topo_DS_Face or TopoDS_Shell with free boundaries.

Member Function Documentation

◆ Generated()

const NCollection_List< TopoDS_Shape > & BRepOffsetAPI_MakeDraft::Generated ( const TopoDS_Shape & S )

overridevirtual

Returns the list of shapes generated from the shape .

Reimplemented from BRepBuilderAPI_MakeShape.

◆ Perform() [1/3]

void BRepOffsetAPI_MakeDraft::Perform ( const double LengthMax )

Performs the draft using the length LengthMax as the maximum length for the corner edge between two draft faces.

◆ Perform() [2/3]

void BRepOffsetAPI_MakeDraft::Perform	(	const occ::handle< Geom_Surface > &	Surface,
		const bool	KeepInsideSurface = true )

Performs the draft up to the surface Surface. If KeepInsideSurface is true, the part of Surface inside the draft is kept in the result.

◆ Perform() [3/3]

void BRepOffsetAPI_MakeDraft::Perform	(	const TopoDS_Shape &	StopShape,
		const bool	KeepOutSide = true )

Performs the draft up to the shape StopShape. If KeepOutSide is true, the part of StopShape which is outside the Draft is kept in the result.

◆ SetDraft()

void BRepOffsetAPI_MakeDraft::SetDraft ( const bool IsInternal = false )

Sets the direction of the draft for this object. If IsInternal is true, the draft is internal to the argument Shape used in the constructor.

◆ SetOptions()

void BRepOffsetAPI_MakeDraft::SetOptions	(	const BRepBuilderAPI_TransitionMode	Style = BRepBuilderAPI_RightCorner,
		const double	AngleMin = 0.01,
		const double	AngleMax = 3.0 )

Sets the options of this draft tool. If a transition has to be performed, it can be defined by the mode Style as RightCorner or RoundCorner, RightCorner being a corner defined by a sharp angle, and RoundCorner being a rounded corner. AngleMin is an angular tolerance used to detect whether a transition has to be performed or not. AngleMax sets the maximum value within which a RightCorner transition can be performed. AngleMin and AngleMax are expressed in radians.

◆ Shell()

TopoDS_Shell BRepOffsetAPI_MakeDraft::Shell ( ) const

Returns the shell resulting from performance of the draft along the wire.

The documentation for this class was generated from the following file:

BRepOffsetAPI_MakeDraft.hxx

Public Member Functions

Additional Inherited Members