An adaptor for curves with an applied transformation. More...

#include <GeomAdaptor_TransformedCurve.hxx>

Inheritance diagram for GeomAdaptor_TransformedCurve:

[legend]

Public Member Functions
	GeomAdaptor_TransformedCurve ()
	Creates an undefined curve with identity transformation.
	GeomAdaptor_TransformedCurve (const occ::handle< Geom_Curve > &theCurve, const gp_Trsf &theTrsf)
	Creates a curve adaptor with transformation.
	GeomAdaptor_TransformedCurve (const occ::handle< Geom_Curve > &theCurve, const double theFirst, const double theLast, const gp_Trsf &theTrsf)
	Creates a curve adaptor with transformation and parameter bounds.
occ::handle< Adaptor3d_Curve >	ShallowCopy () const override
	Shallow copy of adaptor.
void	Load (const occ::handle< Geom_Curve > &theCurve)
	Loads the curve geometry.
void	Load (const occ::handle< Geom_Curve > &theCurve, const double theFirst, const double theLast)
	Loads the curve geometry with parameter bounds.
void	LoadCurveOnSurface (const occ::handle< Adaptor3d_CurveOnSurface > &theConSurf)
	Sets the curve on surface adaptor.
void	SetTrsf (const gp_Trsf &theTrsf)
	Sets the transformation.
const gp_Trsf &	Trsf () const
	Returns the transformation.
bool	Is3DCurve () const
	Returns true if the geometry is a 3D curve (not curve on surface).
bool	IsCurveOnSurface () const
	Returns true if the geometry is a curve on surface.
const GeomAdaptor_Curve &	Curve () const
	Returns the underlying GeomAdaptor_Curve.
GeomAdaptor_Curve &	ChangeCurve ()
	Returns the underlying GeomAdaptor_Curve for modification.
const Adaptor3d_CurveOnSurface &	CurveOnSurface () const
	Returns the CurveOnSurface adaptor.
const occ::handle< Geom_Curve > &	GeomCurve () const
	Returns the underlying Geom_Curve.
double	FirstParameter () const override
double	LastParameter () const override
GeomAbs_Shape	Continuity () const override
int	NbIntervals (const GeomAbs_Shape theS) const override
	Returns the number of intervals for continuity ~~. May be one if Continuity(me) >= .~~
void	Intervals (NCollection_Array1< double > &theT, const GeomAbs_Shape theS) const override
	Stores in <T> the parameters bounding the intervals of continuity .
occ::handle< Adaptor3d_Curve >	Trim (const double theFirst, const double theLast, const double theTol) const override
	Returns a curve equivalent of <me> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last>.
bool	IsClosed () const override
bool	IsPeriodic () const override
double	Period () const override
gp_Pnt	EvalD0 (const double theU) const final
	Point evaluation. Applies transformation after evaluation.
Geom_Curve::ResD1	EvalD1 (const double theU) const final
	D1 evaluation. Applies transformation after evaluation.
Geom_Curve::ResD2	EvalD2 (const double theU) const final
	D2 evaluation. Applies transformation after evaluation.
Geom_Curve::ResD3	EvalD3 (const double theU) const final
	D3 evaluation. Applies transformation after evaluation.
gp_Vec	EvalDN (const double theU, const int theN) const final
	DN evaluation. Applies transformation after evaluation.
double	Resolution (const double theR3d) const override
	Returns the parametric resolution corresponding to the real space resolution <R3d>.
GeomAbs_CurveType	GetType () const override
	Returns the type of the curve in the current interval: Line, Circle, Ellipse, Hyperbola, Parabola, BezierCurve, BSplineCurve, OtherCurve.
gp_Lin	Line () const override
gp_Circ	Circle () const override
gp_Elips	Ellipse () const override
gp_Hypr	Hyperbola () const override
gp_Parab	Parabola () const override
int	Degree () const override
bool	IsRational () const override
int	NbPoles () const override
int	NbKnots () const override
occ::handle< Geom_BezierCurve >	Bezier () const override
occ::handle< Geom_BSplineCurve >	BSpline () const override
occ::handle< Geom_OffsetCurve >	OffsetCurve () const override
Public Member Functions inherited from Adaptor3d_Curve
gp_Pnt	Value (const double theU) const
	Computes the point of parameter U on the curve.
void	D0 (const double theU, gp_Pnt &theP) const
	Computes the point of parameter U on the curve.
void	D1 (const double theU, gp_Pnt &theP, gp_Vec &theV) const
	Computes the point of parameter U on the curve with its first derivative. Raised if the continuity of the current interval is not C1.
void	D2 (const double theU, gp_Pnt &theP, gp_Vec &theV1, gp_Vec &theV2) const
	Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the current interval is not C2.
void	D3 (const double theU, gp_Pnt &theP, gp_Vec &theV1, gp_Vec &theV2, gp_Vec &theV3) const
	Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the current interval is not C3.
gp_Vec	DN (const double theU, const int theN) const
	The returned vector gives the value of the derivative for the order of derivation N. Raised if the continuity of the current interval is not CN. Raised if N < 1.
	~Adaptor3d_Curve () override
Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.
	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.
Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.
virtual	~Standard_Transient ()=default
	Destructor must be virtual.
virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.
bool	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.
bool	IsInstance (const char *const theTypeName) const
	Returns a true value if this is an instance of TypeName.
bool	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
bool	IsKind (const char *const theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.
int	GetRefCount () const noexcept
	Get the reference counter of this object.
void	IncrementRefCounter () noexcept
	Increments the reference counter of this object. Uses relaxed memory ordering since incrementing only requires atomicity, not synchronization with other memory operations.
int	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value. Uses release ordering for the decrement to ensure all writes to the object are visible before the count reaches zero. An acquire fence is added only when the count reaches zero, ensuring proper synchronization before deletion. This is more efficient than using acq_rel for every decrement.
virtual void	Delete () const
	Memory deallocator for transient classes.

Protected Attributes
GeomAdaptor_Curve	myCurve
occ::handle< Adaptor3d_CurveOnSurface >	myConSurf
gp_Trsf	myTrsf

Additional Inherited Members
typedef void	base_type
	Returns a type descriptor about this object.
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.
static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Detailed Description

An adaptor for curves with an applied transformation.

This class wraps a GeomAdaptor_Curve (or an Adaptor3d_CurveOnSurface) and applies a gp_Trsf transformation to all point and derivative evaluations. It serves as a base class for BRepAdaptor_Curve and allows batch evaluation with transformations in GeomGridEval_Curve.

The evaluation methods (Value, D0, D1, D2, D3, DN) are marked final to enable optimizations in grid evaluation.

Constructor & Destructor Documentation

◆ GeomAdaptor_TransformedCurve() [1/3]

GeomAdaptor_TransformedCurve::GeomAdaptor_TransformedCurve ( )

Creates an undefined curve with identity transformation.

◆ GeomAdaptor_TransformedCurve() [2/3]

GeomAdaptor_TransformedCurve::GeomAdaptor_TransformedCurve	(	const occ::handle< Geom_Curve > &	theCurve,
		const gp_Trsf &	theTrsf )

Creates a curve adaptor with transformation.

Parameters

theCurve	underlying geometry
theTrsf	transformation to apply

◆ GeomAdaptor_TransformedCurve() [3/3]

GeomAdaptor_TransformedCurve::GeomAdaptor_TransformedCurve	(	const occ::handle< Geom_Curve > &	theCurve,
		const double	theFirst,
		const double	theLast,
		const gp_Trsf &	theTrsf )

Creates a curve adaptor with transformation and parameter bounds.

Parameters

theCurve	underlying geometry
theFirst	minimum parameter
theLast	maximum parameter
theTrsf	transformation to apply

Member Function Documentation

◆ Bezier()

occ::handle< Geom_BezierCurve > GeomAdaptor_TransformedCurve::Bezier ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ BSpline()

occ::handle< Geom_BSplineCurve > GeomAdaptor_TransformedCurve::BSpline ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ ChangeCurve()

GeomAdaptor_Curve & GeomAdaptor_TransformedCurve::ChangeCurve ( )

inline

Returns the underlying GeomAdaptor_Curve for modification.

◆ Circle()

gp_Circ GeomAdaptor_TransformedCurve::Circle ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Continuity()

GeomAbs_Shape GeomAdaptor_TransformedCurve::Continuity ( ) const

inlineoverridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Curve()

const GeomAdaptor_Curve & GeomAdaptor_TransformedCurve::Curve ( ) const

inline

Returns the underlying GeomAdaptor_Curve.

◆ CurveOnSurface()

const Adaptor3d_CurveOnSurface & GeomAdaptor_TransformedCurve::CurveOnSurface ( ) const

inline

Returns the CurveOnSurface adaptor.

◆ Degree()

int GeomAdaptor_TransformedCurve::Degree ( ) const

inlineoverridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Ellipse()

gp_Elips GeomAdaptor_TransformedCurve::Ellipse ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ EvalD0()

gp_Pnt GeomAdaptor_TransformedCurve::EvalD0 ( const double theU ) const

nodiscardfinalvirtual

Point evaluation. Applies transformation after evaluation.

Reimplemented from Adaptor3d_Curve.

◆ EvalD1()

Geom_Curve::ResD1 GeomAdaptor_TransformedCurve::EvalD1 ( const double theU ) const

nodiscardfinalvirtual

D1 evaluation. Applies transformation after evaluation.

Reimplemented from Adaptor3d_Curve.

◆ EvalD2()

Geom_Curve::ResD2 GeomAdaptor_TransformedCurve::EvalD2 ( const double theU ) const

nodiscardfinalvirtual

D2 evaluation. Applies transformation after evaluation.

Reimplemented from Adaptor3d_Curve.

◆ EvalD3()

Geom_Curve::ResD3 GeomAdaptor_TransformedCurve::EvalD3 ( const double theU ) const

nodiscardfinalvirtual

D3 evaluation. Applies transformation after evaluation.

Reimplemented from Adaptor3d_Curve.

◆ EvalDN()

gp_Vec GeomAdaptor_TransformedCurve::EvalDN	(	const double	theU,
		const int	theN ) const

nodiscardfinalvirtual

DN evaluation. Applies transformation after evaluation.

Reimplemented from Adaptor3d_Curve.

◆ FirstParameter()

double GeomAdaptor_TransformedCurve::FirstParameter ( ) const

inlineoverridevirtual

Reimplemented from Adaptor3d_Curve.

◆ GeomCurve()

const occ::handle< Geom_Curve > & GeomAdaptor_TransformedCurve::GeomCurve ( ) const

inline

Returns the underlying Geom_Curve.

◆ GetType()

GeomAbs_CurveType GeomAdaptor_TransformedCurve::GetType ( ) const

inlineoverridevirtual

Returns the type of the curve in the current interval: Line, Circle, Ellipse, Hyperbola, Parabola, BezierCurve, BSplineCurve, OtherCurve.

Reimplemented from Adaptor3d_Curve.

◆ Hyperbola()

gp_Hypr GeomAdaptor_TransformedCurve::Hyperbola ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Intervals()

void GeomAdaptor_TransformedCurve::Intervals	(	NCollection_Array1< double > &	T,
		const GeomAbs_Shape	S ) const

overridevirtual

Stores in <T> the parameters bounding the intervals of continuity .

The array must provide enough room to accommodate for the parameters. i.e. T.Length() > NbIntervals()

Reimplemented from Adaptor3d_Curve.

◆ Is3DCurve()

bool GeomAdaptor_TransformedCurve::Is3DCurve ( ) const

inline

Returns true if the geometry is a 3D curve (not curve on surface).

◆ IsClosed()

bool GeomAdaptor_TransformedCurve::IsClosed ( ) const

inlineoverridevirtual

Reimplemented from Adaptor3d_Curve.

◆ IsCurveOnSurface()

bool GeomAdaptor_TransformedCurve::IsCurveOnSurface ( ) const

inline

Returns true if the geometry is a curve on surface.

◆ IsPeriodic()

bool GeomAdaptor_TransformedCurve::IsPeriodic ( ) const

inlineoverridevirtual

Reimplemented from Adaptor3d_Curve.

◆ IsRational()

bool GeomAdaptor_TransformedCurve::IsRational ( ) const

inlineoverridevirtual

Reimplemented from Adaptor3d_Curve.

◆ LastParameter()

double GeomAdaptor_TransformedCurve::LastParameter ( ) const

inlineoverridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Line()

gp_Lin GeomAdaptor_TransformedCurve::Line ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Load() [1/2]

void GeomAdaptor_TransformedCurve::Load ( const occ::handle< Geom_Curve > & theCurve )

inline

Loads the curve geometry.

Parameters

theCurve underlying geometry

◆ Load() [2/2]

void GeomAdaptor_TransformedCurve::Load	(	const occ::handle< Geom_Curve > &	theCurve,
		const double	theFirst,
		const double	theLast )

inline

Loads the curve geometry with parameter bounds.

Parameters

theCurve	underlying geometry
theFirst	minimum parameter
theLast	maximum parameter

◆ LoadCurveOnSurface()

void GeomAdaptor_TransformedCurve::LoadCurveOnSurface ( const occ::handle< Adaptor3d_CurveOnSurface > & theConSurf )

inline

Sets the curve on surface adaptor.

Parameters

theConSurf curve on surface adaptor

◆ NbIntervals()

int GeomAdaptor_TransformedCurve::NbIntervals ( const GeomAbs_Shape S ) const

inlineoverridevirtual

Returns the number of intervals for continuity ~~. May be one if Continuity(me) >= .~~

Reimplemented from Adaptor3d_Curve.

◆ NbKnots()

int GeomAdaptor_TransformedCurve::NbKnots ( ) const

inlineoverridevirtual

Reimplemented from Adaptor3d_Curve.

◆ NbPoles()

int GeomAdaptor_TransformedCurve::NbPoles ( ) const

inlineoverridevirtual

Reimplemented from Adaptor3d_Curve.

◆ OffsetCurve()

occ::handle< Geom_OffsetCurve > GeomAdaptor_TransformedCurve::OffsetCurve ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Parabola()

gp_Parab GeomAdaptor_TransformedCurve::Parabola ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Period()

double GeomAdaptor_TransformedCurve::Period ( ) const

inlineoverridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Resolution()

double GeomAdaptor_TransformedCurve::Resolution ( const double R3d ) const

inlineoverridevirtual

Returns the parametric resolution corresponding to the real space resolution <R3d>.

Reimplemented from Adaptor3d_Curve.

◆ SetTrsf()

void GeomAdaptor_TransformedCurve::SetTrsf ( const gp_Trsf & theTrsf )

inline

Sets the transformation.

Parameters

theTrsf transformation to apply

◆ ShallowCopy()

occ::handle< Adaptor3d_Curve > GeomAdaptor_TransformedCurve::ShallowCopy ( ) const

overridevirtual

Shallow copy of adaptor.

Reimplemented from Adaptor3d_Curve.

◆ Trim()

occ::handle< Adaptor3d_Curve > GeomAdaptor_TransformedCurve::Trim	(	const double	First,
		const double	Last,
		const double	Tol ) const

overridevirtual

Returns a curve equivalent of <me> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last>.

Reimplemented from Adaptor3d_Curve.

◆ Trsf()

const gp_Trsf & GeomAdaptor_TransformedCurve::Trsf ( ) const

inline

Returns the transformation.

Field Documentation

◆ myConSurf

occ::handle<Adaptor3d_CurveOnSurface> GeomAdaptor_TransformedCurve::myConSurf

protected

◆ myCurve

GeomAdaptor_Curve GeomAdaptor_TransformedCurve::myCurve

protected

◆ myTrsf

gp_Trsf GeomAdaptor_TransformedCurve::myTrsf

protected

The documentation for this class was generated from the following file:

GeomAdaptor_TransformedCurve.hxx

Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ GeomAdaptor_TransformedCurve() [1/3]

◆ GeomAdaptor_TransformedCurve() [2/3]

◆ GeomAdaptor_TransformedCurve() [3/3]

Member Function Documentation

◆ Bezier()

◆ BSpline()

◆ ChangeCurve()

◆ Circle()

◆ Continuity()

◆ Curve()

◆ CurveOnSurface()

◆ Degree()

◆ Ellipse()

◆ EvalD0()

◆ EvalD1()

◆ EvalD2()

◆ EvalD3()

◆ EvalDN()

◆ FirstParameter()

◆ GeomCurve()

◆ GetType()

◆ Hyperbola()

◆ Intervals()

◆ Is3DCurve()

◆ IsClosed()

◆ IsCurveOnSurface()

◆ IsPeriodic()

◆ IsRational()

◆ LastParameter()

◆ Line()

◆ Load() [1/2]

◆ Load() [2/2]

◆ LoadCurveOnSurface()

◆ NbIntervals()

◆ NbKnots()

◆ NbPoles()

◆ OffsetCurve()

◆ Parabola()

◆ Period()

◆ Resolution()

◆ SetTrsf()

◆ ShallowCopy()

◆ Trim()

◆ Trsf()

Field Documentation

◆ myConSurf

◆ myCurve

◆ myTrsf