This class gives a way to manage meaningful static variables, used as "global" parameters in various procedures. More...

#include <Interface_Static.hxx>

Inheritance diagram for Interface_Static:

[legend]

Public Member Functions
	Interface_Static (const char const family, const char const namename, const Interface_ParamType typetype=Interface_ParamText, const char *const init="")
	Creates and records a Static, with a family and a name family can report to a name of resource or to a system or internal definition. The name must be unique.
	Interface_Static (const char const family, const char const namename, const occ::handle< Interface_Static > &other)
	Creates a new Static with same definition as another one (value is copied, except for Entity : it remains null).
void	PrintStatic (Standard_OStream &S) const
	Writes the properties of a parameter in the diagnostic file. These include:
const char *	Family () const
	Returns the family. It can be : a resource name for applis, an internal name between : $e (environment variables), $l (other, purely local).
void	SetWild (const occ::handle< Interface_Static > &wildcard)
	Sets a "wild-card" static : its value will be considered if <me> is not properly set. (reset by set a null one).
occ::handle< Interface_Static >	Wild () const
	Returns the wildcard static, which can be (is most often) null.
void	SetUptodate ()
	Records a Static has "uptodate", i.e. its value has been taken into account by a reinitialisation procedure This flag is reset at each successful SetValue.
bool	UpdatedStatus () const
	Returns the status "uptodate".
Public Member Functions inherited from Interface_TypedValue
	Interface_TypedValue (const char const namename, const Interface_ParamType typetype=Interface_ParamText, const char const init="")
	Creates a TypedValue, with a name.
Interface_ParamType	Type () const
	Returns the type I.E. calls ValueType then makes correspondence between ParamType from Interface (which remains for compatibility reasons) and ValueType from MoniTool.
Public Member Functions inherited from MoniTool_TypedValue
	MoniTool_TypedValue (const char const namename, const MoniTool_ValueType typetype=MoniTool_ValueText, const char const init="")
	Creates a TypedValue, with a name.
	MoniTool_TypedValue (const occ::handle< MoniTool_TypedValue > &other)
	Creates a TypedValue from another one, by duplication.
void	Internals (MoniTool_ValueInterpret &interpinterp, MoniTool_ValueSatisfies &satisf, const char *&satisname, NCollection_DataMap< TCollection_AsciiString, int > &enums) const
	Access to internal data which have no other access.
const char *	Name () const
	Returns the name.
MoniTool_ValueType	ValueType () const
	Returns the type of the value.
TCollection_AsciiString	Definition () const
	Returns the Definition By priority, the enforced one, else an automatic one, computed from the specification.
void	SetDefinition (const char *const deftext)
	Enforces a Definition.
virtual void	Print (Standard_OStream &S) const
	Prints definition, specification, and actual status and value.
void	PrintValue (Standard_OStream &S) const
	Prints only the Value.
bool	AddDef (const char *const initext)
	Completes the definition of a TypedValue by command <initext>, once created with its type Returns True if done, False if could not be interpreted <initext> may be : imin ival : minimum value for an integer imax ival : maximum value for an integer rmin rval : minimum value for a real rmax rval : maximum value for a real unit name : name of unit ematch i : enum from integer value i, match required enum i : enum from integer value i, match not required eval text : add an enumerative value (increments max by 1) eval ?? : add a non-authorised enum value (to be skipped) tmax l : maximum length for a text.
void	SetLabel (const char *const labellabel)
	Sets a label, which can then be displayed.
const char *	Label () const
	Returns the label, if set; else returns an empty string.
void	SetMaxLength (const int max)
	Sets a maximum length for a text (active only for a free text).
int	MaxLength () const
	Returns the maximum length, 0 if not set.
void	SetIntegerLimit (const bool max, const int valval)
	Sets an Integer limit (included) to <val>, the upper limit if <max> is True, the lower limit if <max> is False.
bool	IntegerLimit (const bool max, int &valval) const
	Gives an Integer Limit (upper if <max> True, lower if <max> False). Returns True if this limit is defined, False else (in that case, gives the natural limit for Integer).
void	SetRealLimit (const bool max, const double valval)
	Sets a Real limit (included) to <val>, the upper limit if <max> is True, the lower limit if <max> is False.
bool	RealLimit (const bool max, double &valval) const
	Gives an Real Limit (upper if <max> True, lower if <max> False). Returns True if this limit is defined, False else (in that case, gives the natural limit for Real).
void	SetUnitDef (const char *const def)
	Sets (Clears if <def> empty) a unit definition, as an equation of dimensions. TypedValue just records this definition, does not exploit it, to be done as required by user applications.
const char *	UnitDef () const
	Returns the recorded unit definition, empty if not set.
void	StartEnum (const int startstart=0, const bool match=true)
	For an enumeration, precises the starting value (default 0) and the match condition : if True (D), the string value must match the definition, else it may take another value : in that case, the Integer Value will be Start - 1. (empty value remains allowed).
void	AddEnum (const char const v1v1="", const char const v2v2="", const char const v3v3="", const char const v4="", const char const v5="", const char const v6="", const char const v7="", const char const v8="", const char const v9="", const char const v10="")
	Adds enumerative definitions. For more than 10, several calls.
void	AddEnumValue (const char *const valval, const int numnum)
	Adds an enumeration definition, by its string and numeric values. If it is the first setting for this value, it is recorded as main value. Else, it is recognized as alternate string for this numeric value.
bool	EnumDef (int &startcase, int &endcase, bool &match) const
	Gives the Enum definitions : start value, end value, match status. Returns True for an Enum, False else.
const char *	EnumVal (const int numnum) const
	Returns the value of an enumerative definition, from its rank Empty string if out of range or not an Enum.
int	EnumCase (const char *const valval) const
	Returns the case number which corresponds to a string value Works with main and additional values Returns (StartEnum - 1) if not OK, -1 if not an Enum.
void	SetObjectType (const occ::handle< Standard_Type > &typ)
	Sets type of which an Object TypedValue must be kind of Error for a TypedValue not an Object (Entity).
occ::handle< Standard_Type >	ObjectType () const
	Returns the type of which an Object TypedValue must be kind of Default is Standard_Transient Null for a TypedValue not an Object.
void	SetInterpret (const MoniTool_ValueInterpret funcfunc)
	Sets a specific Interpret function.
virtual bool	HasInterpret () const
	Tells if a TypedValue has an Interpret.
void	SetSatisfies (const MoniTool_ValueSatisfies funcfunc, const char *const namename)
	Sets a specific Satisfies function : it is added to the already defined criteria It must match the form : satisfies (val : HAsciiString) returns Boolean.
const char *	SatisfiesName () const
	Returns name of specific satisfy, empty string if none.
bool	IsSetValue () const
	Returns True if the value is set (not empty/not null object).
const char *	CStringValue () const
	Returns the value, as a cstring. Empty if not set.
occ::handle< TCollection_HAsciiString >	HStringValue () const
	Returns the value, as a Handle (can then be shared) Null if not defined.
virtual occ::handle< TCollection_HAsciiString >	Interpret (const occ::handle< TCollection_HAsciiString > &hval, const bool native) const
	Interprets a value. <native> True : returns a native value <native> False : returns a coded value If the Interpret function is set, calls it Else, for an Enum, Native returns the Text, Coded returns the number STANDARD RETURNS : = hval means no specific interpretation Null means senseless Can also be redefined.
virtual bool	Satisfies (const occ::handle< TCollection_HAsciiString > &hval) const
	Returns True if a value statifies the specification (remark : does not apply to Entity : see ObjectType, for this type, the string is just a comment).
void	ClearValue ()
	Clears the recorded Value : it is now unset.
virtual bool	SetCStringValue (const char *const valval)
	Changes the value. The new one must satisfy the specification Returns False (and did not set) if the new value does not satisfy the specification Can be redefined to be managed (in a subclass).
virtual bool	SetHStringValue (const occ::handle< TCollection_HAsciiString > &hval)
	Forces a new Handle for the Value It can be empty, else (if Type is not free Text), it must satisfy the specification. Not only the value is changed, but also the way it is shared Remark : for Type=Object, this value is not controlled, it can be set as a comment Returns False (and did not set) if the new value does not satisfy the specification Can be redefined to be managed (in a subclass).
int	IntegerValue () const
	Returns the value as integer, i.e. : For type = Integer, the integer itself; 0 if not set For type = Enum, the designated rank (see Enum definition) StartEnum - 1 if not set or not in the definition Else, returns 0.
virtual bool	SetIntegerValue (const int ival)
	Changes the value as an integer, only for Integer or Enum.
double	RealValue () const
	Returns the value as real, for a Real type TypedValue Else, returns 0.
virtual bool	SetRealValue (const double rval)
	Changes the value as a real, only for Real.
occ::handle< Standard_Transient >	ObjectValue () const
	Returns the value as Transient Object, only for Object/Entity Remark that the "HString value" is IGNORED here Null if not set; remains to be casted.
void	GetObjectValue (occ::handle< Standard_Transient > &valval) const
	Same as ObjectValue, but avoids DownCast : the receiving variable is directly loaded. It is assumed that it complies with the definition of ObjectType ! Otherwise, big trouble.
virtual bool	SetObjectValue (const occ::handle< Standard_Transient > &objobj)
	Changes the value as Transient Object, only for Object/Entity Returns False if DynamicType does not satisfy ObjectType Can be redefined to be managed (in a subclass).
const char *	ObjectTypeName () const
	Returns the type name of the ObjectValue, or an empty string if not set.
Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.
	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.
Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.
virtual	~Standard_Transient ()=default
	Destructor must be virtual.
virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.
bool	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.
bool	IsInstance (const char *const theTypeName) const
	Returns a true value if this is an instance of TypeName.
bool	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
bool	IsKind (const char *const theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.
int	GetRefCount () const noexcept
	Get the reference counter of this object.
void	IncrementRefCounter () noexcept
	Increments the reference counter of this object. Uses relaxed memory ordering since incrementing only requires atomicity, not synchronization with other memory operations.
int	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value. Uses release ordering for the decrement to ensure all writes to the object are visible before the count reaches zero. An acquire fence is added only when the count reaches zero, ensuring proper synchronization before deletion. This is more efficient than using acq_rel for every decrement.
virtual void	Delete () const
	Memory deallocator for transient classes.

Static Public Member Functions
static bool	Init (const char const family, const char const namename, const Interface_ParamType typetype, const char *const init="")
	Declares a new Static (by calling its constructor) If this name is already taken, does nothing and returns False Else, creates it and returns True For additional definitions, get the Static then edit it.
static bool	Init (const char const family, const char const namename, const char typetype, const char *const init="")
	As Init with ParamType, but type is given as a character This allows a simpler call Types : 'i' Integer, 'r' Real, 't' Text, 'e' Enum, 'o' Object '=' for same definition as, <init> gives the initial Static Returns False if <type> does not match this list.
static occ::handle< Interface_Static >	Static (const char *const namename)
	Returns a Static from its name. Null Handle if not present.
static bool	IsPresent (const char *const namename)
	Returns True if a Static named <name> is present, False else.
static const char *	CDef (const char const namename, const char const part)
	Returns a part of the definition of a Static, as a CString The part is designated by its name, as a CString If the required value is not a string, it is converted to a CString then returned If <name> is not present, or <part> not defined for <name>, this function returns an empty string.
static int	IDef (const char const namename, const char const part)
	Returns a part of the definition of a Static, as an Integer The part is designated by its name, as a CString If the required value is not a string, returns zero For a Boolean, 0 for false, 1 for true If <name> is not present, or <part> not defined for <name>, this function returns zero.
static bool	IsSet (const char *const namename, const bool proper=true)
	Returns True if <name> is present AND set <proper> True (D) : considers this item only <proper> False : if not set and attached to a wild-card, considers this wild-card.
static const char *	CVal (const char *const namename)
	Returns the value of the parameter identified by the string name. If the specified parameter does not exist, an empty string is returned. Example Interface_Static::CVal("write.step.schema"); which could return: "AP214".
static int	IVal (const char *const namename)
	Returns the integer value of the translation parameter identified by the string name. Returns the value 0 if the parameter does not exist. Example Interface_Static::IVal("write.step.schema"); which could return: 3.
static double	RVal (const char *const namename)
	Returns the value of a static translation parameter identified by the string name. Returns the value 0.0 if the parameter does not exist.
static bool	SetCVal (const char const namename, const char const valval)
	Modifies the value of the parameter identified by name. The modification is specified by the string val. false is returned if the parameter does not exist. Example Interface_Static::SetCVal ("write.step.schema","AP203") This syntax specifies a switch from the default STEP 214 mode to STEP 203 mode.
static bool	SetIVal (const char *const namename, const int valval)
	Modifies the value of the parameter identified by name. The modification is specified by the integer value val. false is returned if the parameter does not exist. Example Interface_Static::SetIVal ("write.step.schema", 3) This syntax specifies a switch from the default STEP 214 mode to STEP 203 mode.S.
static bool	SetRVal (const char *const namename, const double valval)
	Modifies the value of a translation parameter. false is returned if the parameter does not exist. The modification is specified by the real number value val.
static bool	Update (const char *const namename)
	Sets a Static to be "uptodate" Returns False if <name> is not present This status can be used by a reinitialisation procedure to rerun if a value has been changed.
static bool	IsUpdated (const char *const namename)
	Returns the status "uptodate" from a Static Returns False if <name> is not present.
static occ::handle< NCollection_HSequence< occ::handle< TCollection_HAsciiString > > >	Items (const int modemode=0, const char *const criter="")
	Returns a list of names of statics : <mode> = 0 (D) : criter is for family <mode> = 1 : criter is regexp on names, takes final items (ignore wild cards) <mode> = 2 : idem but take only wilded, not final items <mode> = 3 : idem, take all items matching criter idem + 100 : takes only non-updated items idem + 200 : takes only updated items criter empty (D) : returns all names else returns names which match the given criter Remark : families beginning by '$' are not listed by criter "" they are listed only by criter "$".
static void	Standards ()
	Initializes all standard static parameters, which can be used by every function. statics specific of a norm or a function must be defined around it.
static void	FillMap (NCollection_DataMap< TCollection_AsciiString, TCollection_AsciiString > &theMap)
	Fills given string-to-string map with all static data.
Static Public Member Functions inherited from Interface_TypedValue
static MoniTool_ValueType	ParamTypeToValueType (const Interface_ParamType typ)
	Correspondence ParamType from Interface to ValueType from MoniTool.
static Interface_ParamType	ValueTypeToParamType (const MoniTool_ValueType typ)
	Correspondence ParamType from Interface to ValueType from MoniTool.
Static Public Member Functions inherited from MoniTool_TypedValue
static bool	AddLib (const occ::handle< MoniTool_TypedValue > &tv, const char *const def="")
	Adds a TypedValue in the library. It is recorded then will be accessed by its Name Its Definition may be imposed, else it is computed as usual By default it will be accessed by its Definition (string) Returns True if done, False if tv is Null or brings no Definition or <def> not defined.
static occ::handle< MoniTool_TypedValue >	Lib (const char *const def)
	Returns the TypedValue bound with a given Name Null Handle if none recorded Warning: it is the original, not duplicated.
static occ::handle< MoniTool_TypedValue >	FromLib (const char *const def)
	Returns a COPY of the TypedValue bound with a given Name Null Handle if none recorded.
static occ::handle< NCollection_HSequence< TCollection_AsciiString > >	LibList ()
	Returns the list of names of items of the Library of Types Library of TypedValue as Valued Parameters, accessed by parameter name for use by management of Static Parameters.
static occ::handle< MoniTool_TypedValue >	StaticValue (const char *const namename)
	Returns a static value from its name, null if unknown.
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.
static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Additional Inherited Members
typedef void	base_type
	Returns a type descriptor about this object.
Static Protected Member Functions inherited from MoniTool_TypedValue
static NCollection_DataMap< TCollection_AsciiString, occ::handle< Standard_Transient > > &	Stats ()
	Gives the internal library of static values.

Detailed Description

This class gives a way to manage meaningful static variables, used as "global" parameters in various procedures.

A Static brings a specification (its type, constraints if any) and a value. Its basic form is a string, it can be specified as integer or real or enumerative string, and queried as such. Its string content, which is a occ::handle<HAsciiString> can be shared by other data structures, hence gives a direct on line access to its value.

All this description is inherited from TypedValue

A Static can be given an initial value, it can be filled from, either a set of Resources (an applicative feature which accesses and manages parameter files), or environment or internal definition : these define families of Static. In addition, it supports a status for reinitialisation : an initialisation procedure can ask if the value of the Static has changed from its last call, in this case does something then marks the Status "uptodate", else it does nothing.

Statics are named and recorded then accessed in an alphabetic dictionary

Constructor & Destructor Documentation

◆ Interface_Static() [1/2]

Interface_Static::Interface_Static	(	const char *const	family,
		const char *const	name,
		const Interface_ParamType	type = Interface_ParamText,
		const char *const	init = "" )

Creates and records a Static, with a family and a name family can report to a name of resource or to a system or internal definition. The name must be unique.

type gives the type of the parameter, default is free text Also available : Integer, Real, Enum, Entity (i.e. Object) More precise specifications, titles, can be given to the Static once created

init gives an initial value. If it is not given, the Static begin as "not set", its value is empty

◆ Interface_Static() [2/2]

Interface_Static::Interface_Static	(	const char *const	family,
		const char *const	name,
		const occ::handle< Interface_Static > &	other )

Creates a new Static with same definition as another one (value is copied, except for Entity : it remains null).

Member Function Documentation

◆ CDef()

const char * Interface_Static::CDef	(	const char *const	name,
		const char *const	part )

static

Returns a part of the definition of a Static, as a CString The part is designated by its name, as a CString If the required value is not a string, it is converted to a CString then returned If <name> is not present, or <part> not defined for <name>, this function returns an empty string.

Allowed parts for CDef : family : the family type : the type ("integer","real","text","enum") label : the label satis : satisfy function name if any rmin : minimum real value rmax : maximum real value imin : minimum integer value imax : maximum integer value enum nn (nn : value of an integer) : enum value for nn unit : unit definition for a real

◆ CVal()

const char * Interface_Static::CVal ( const char *const name )

static

Returns the value of the parameter identified by the string name. If the specified parameter does not exist, an empty string is returned. Example Interface_Static::CVal("write.step.schema"); which could return: "AP214".

◆ Family()

const char * Interface_Static::Family ( ) const

Returns the family. It can be : a resource name for applis, an internal name between : $e (environment variables), $l (other, purely local).

◆ FillMap()

void Interface_Static::FillMap ( NCollection_DataMap< TCollection_AsciiString, TCollection_AsciiString > & theMap )

static

Fills given string-to-string map with all static data.

◆ IDef()

int Interface_Static::IDef	(	const char *const	name,
		const char *const	part )

static

Returns a part of the definition of a Static, as an Integer The part is designated by its name, as a CString If the required value is not a string, returns zero For a Boolean, 0 for false, 1 for true If <name> is not present, or <part> not defined for <name>, this function returns zero.

Allowed parts for IDef : imin, imax : minimum or maximum integer value estart : starting number for enum ecount : count of enum values (starting from estart) ematch : exact match status eval val : case determined from a string

◆ Init() [1/2]

bool Interface_Static::Init	(	const char *const	family,
		const char *const	name,
		const char	type,
		const char *const	init = "" )

static

As Init with ParamType, but type is given as a character This allows a simpler call Types : 'i' Integer, 'r' Real, 't' Text, 'e' Enum, 'o' Object '=' for same definition as, <init> gives the initial Static Returns False if <type> does not match this list.

◆ Init() [2/2]

bool Interface_Static::Init	(	const char *const	family,
		const char *const	name,
		const Interface_ParamType	type,
		const char *const	init = "" )

static

Declares a new Static (by calling its constructor) If this name is already taken, does nothing and returns False Else, creates it and returns True For additional definitions, get the Static then edit it.

◆ IsPresent()

bool Interface_Static::IsPresent ( const char *const name )

static

Returns True if a Static named <name> is present, False else.

◆ IsSet()

bool Interface_Static::IsSet	(	const char *const	name,
		const bool	proper = true )

static

Returns True if <name> is present AND set <proper> True (D) : considers this item only <proper> False : if not set and attached to a wild-card, considers this wild-card.

◆ IsUpdated()

bool Interface_Static::IsUpdated ( const char *const name )

static

Returns the status "uptodate" from a Static Returns False if <name> is not present.

◆ Items()

occ::handle< NCollection_HSequence< occ::handle< TCollection_HAsciiString > > > Interface_Static::Items	(	const int	mode = 0,
		const char *const	criter = "" )

static

Returns a list of names of statics : <mode> = 0 (D) : criter is for family <mode> = 1 : criter is regexp on names, takes final items (ignore wild cards) <mode> = 2 : idem but take only wilded, not final items <mode> = 3 : idem, take all items matching criter idem + 100 : takes only non-updated items idem + 200 : takes only updated items criter empty (D) : returns all names else returns names which match the given criter Remark : families beginning by '$' are not listed by criter "" they are listed only by criter "$".

This allows for instance to set new values after having loaded or reloaded a resource, then to update them as required

◆ IVal()

int Interface_Static::IVal ( const char *const name )

static

Returns the integer value of the translation parameter identified by the string name. Returns the value 0 if the parameter does not exist. Example Interface_Static::IVal("write.step.schema"); which could return: 3.

◆ PrintStatic()

void Interface_Static::PrintStatic ( Standard_OStream & S ) const

Writes the properties of a parameter in the diagnostic file. These include:

Name
Family,
Wildcard (if it has one)
Current status (empty string if it was updated or if it is the original one)
Value

◆ RVal()

double Interface_Static::RVal ( const char *const name )

static

Returns the value of a static translation parameter identified by the string name. Returns the value 0.0 if the parameter does not exist.

◆ SetCVal()

bool Interface_Static::SetCVal	(	const char *const	name,
		const char *const	val )

static

Modifies the value of the parameter identified by name. The modification is specified by the string val. false is returned if the parameter does not exist. Example Interface_Static::SetCVal ("write.step.schema","AP203") This syntax specifies a switch from the default STEP 214 mode to STEP 203 mode.

◆ SetIVal()

bool Interface_Static::SetIVal	(	const char *const	name,
		const int	val )

static

Modifies the value of the parameter identified by name. The modification is specified by the integer value val. false is returned if the parameter does not exist. Example Interface_Static::SetIVal ("write.step.schema", 3) This syntax specifies a switch from the default STEP 214 mode to STEP 203 mode.S.

◆ SetRVal()

bool Interface_Static::SetRVal	(	const char *const	name,
		const double	val )

static

Modifies the value of a translation parameter. false is returned if the parameter does not exist. The modification is specified by the real number value val.

◆ SetUptodate()

void Interface_Static::SetUptodate ( )

Records a Static has "uptodate", i.e. its value has been taken into account by a reinitialisation procedure This flag is reset at each successful SetValue.

◆ SetWild()

void Interface_Static::SetWild ( const occ::handle< Interface_Static > & wildcard )

Sets a "wild-card" static : its value will be considered if <me> is not properly set. (reset by set a null one).

◆ Standards()

void Interface_Static::Standards ( )

static

Initializes all standard static parameters, which can be used by every function. statics specific of a norm or a function must be defined around it.

◆ Static()

occ::handle< Interface_Static > Interface_Static::Static ( const char *const name )

static

Returns a Static from its name. Null Handle if not present.

◆ Update()

bool Interface_Static::Update ( const char *const name )

static

Sets a Static to be "uptodate" Returns False if <name> is not present This status can be used by a reinitialisation procedure to rerun if a value has been changed.

◆ UpdatedStatus()

bool Interface_Static::UpdatedStatus ( ) const

Returns the status "uptodate".

◆ Wild()

occ::handle< Interface_Static > Interface_Static::Wild ( ) const

Returns the wildcard static, which can be (is most often) null.

The documentation for this class was generated from the following file:

Interface_Static.hxx

Public Member Functions

Static Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ Interface_Static() [1/2]

◆ Interface_Static() [2/2]

Member Function Documentation

◆ CDef()

◆ CVal()

◆ Family()

◆ FillMap()

◆ IDef()

◆ Init() [1/2]

◆ Init() [2/2]

◆ IsPresent()

◆ IsSet()

◆ IsUpdated()

◆ Items()

◆ IVal()

◆ PrintStatic()

◆ RVal()

◆ SetCVal()

◆ SetIVal()

◆ SetRVal()

◆ SetUptodate()

◆ SetWild()

◆ Standards()

◆ Static()

◆ Update()

◆ UpdatedStatus()

◆ Wild()