#include <TopOpeBRep_VPointInter.hxx>

Public Member Functions
	TopOpeBRep_VPointInter ()
void	SetPoint (const IntPatch_Point &P)
void	SetShapes (const int I1, const int I2)
void	GetShapes (int &I1, int &I2) const
IntSurf_Transition	TransitionOnS1 () const
IntSurf_Transition	TransitionOnS2 () const
IntSurf_Transition	TransitionLineArc1 () const
IntSurf_Transition	TransitionLineArc2 () const
bool	IsOnDomS1 () const
bool	IsOnDomS2 () const
void	ParametersOnS1 (double &u, double &vv) const
void	ParametersOnS2 (double &u, double &vv) const
const gp_Pnt &	Value () const
double	Tolerance () const
const TopoDS_Shape &	ArcOnS1 () const
const TopoDS_Shape &	ArcOnS2 () const
double	ParameterOnLine () const
double	ParameterOnArc1 () const
bool	IsVertexOnS1 () const
	Returns TRUE if the point is a vertex on the initial restriction facet of the first surface.
const TopoDS_Shape &	VertexOnS1 () const
	Returns the information about the point when it is on the domain of the first patch, i-e when the function IsVertexOnS1 returns True. Otherwise, an exception is raised.
double	ParameterOnArc2 () const
bool	IsVertexOnS2 () const
	Returns TRUE if the point is a vertex on the initial restriction facet of the second surface.
const TopoDS_Shape &	VertexOnS2 () const
	Returns the information about the point when it is on the domain of the second patch, i-e when the function IsVertexOnS2 returns True. Otherwise, an exception is raised.
bool	IsInternal () const
bool	IsMultiple () const
	Returns True if the point belongs to several intersection lines.
TopAbs_State	State (const int I) const
	get state of VPoint within the domain of geometric shape domain (= 1 or 2).
void	State (const TopAbs_State S, const int I)
	Set the state of VPoint within the domain of the geometric shape (= 1 or 2).
void	EdgeON (const TopoDS_Shape &Eon, const double Par, const int I)
	set the shape Eon of shape I (1,2) containing the point, and parameter <Par> of point on <Eon>.
const TopoDS_Shape &	EdgeON (const int I) const
	get the edge of shape I (1,2) containing the point.
double	EdgeONParameter (const int I) const
	get the parameter on edge of shape I (1,2) containing the point.
int	ShapeIndex () const
	returns value of filed myShapeIndex = 0,1,2,3 0 means the VPoint is on no restriction 1 means the VPoint is on the restriction 1 2 means the VPoint is on the restriction 2 3 means the VPoint is on the restrictions 1 and 2
void	ShapeIndex (const int I)
	set value of shape supporting me (0,1,2,3).
const TopoDS_Shape &	Edge (const int I) const
	get the edge of shape I (1,2) containing the point. Returned shape is null if the VPoint is not on an edge of shape I (1,2).
double	EdgeParameter (const int I) const
	get the parameter on edge of shape I (1,2) containing the point
gp_Pnt2d	SurfaceParameters (const int I) const
	get the parameter on surface of shape I (1,2) containing the point
bool	IsVertex (const int I) const
const TopoDS_Shape &	Vertex (const int I) const
void	UpdateKeep ()
	set myKeep value according to current states.
bool	Keep () const
	Returns value of myKeep (does not evaluate states) False at creation of VPoint. Updated by State(State from TopAbs,Integer from Standard).
void	ChangeKeep (const bool keep)
	updates VPointInter flag "keep" with <keep>.
bool	EqualpP (const TopOpeBRep_VPointInter &VP) const
	returns <True> if the 3d points and the parameters of the VPoints are same
bool	ParonE (const TopoDS_Edge &E, double &par) const
	returns <false> if the vpoint is not given on arc <E>, else returns <par> parameter on <E>
void	Index (const int I)
int	Index () const
Standard_OStream &	Dump (const int I, const TopoDS_Face &F, Standard_OStream &OS) const
Standard_OStream &	Dump (const TopoDS_Face &F1, const TopoDS_Face &F2, Standard_OStream &OS) const
TopOpeBRep_PThePointOfIntersection	PThePointOfIntersectionDummy () const

Constructor & Destructor Documentation

◆ TopOpeBRep_VPointInter()

TopOpeBRep_VPointInter::TopOpeBRep_VPointInter ( )

Member Function Documentation

◆ ArcOnS1()

const TopoDS_Shape & TopOpeBRep_VPointInter::ArcOnS1 ( ) const

◆ ArcOnS2()

const TopoDS_Shape & TopOpeBRep_VPointInter::ArcOnS2 ( ) const

◆ ChangeKeep()

void TopOpeBRep_VPointInter::ChangeKeep ( const bool keep )

updates VPointInter flag "keep" with <keep>.

◆ Dump() [1/2]

Standard_OStream & TopOpeBRep_VPointInter::Dump	(	const int	I,
		const TopoDS_Face &	F,
		Standard_OStream &	OS ) const

◆ Dump() [2/2]

Standard_OStream & TopOpeBRep_VPointInter::Dump	(	const TopoDS_Face &	F1,
		const TopoDS_Face &	F2,
		Standard_OStream &	OS ) const

◆ Edge()

const TopoDS_Shape & TopOpeBRep_VPointInter::Edge ( const int I ) const

get the edge of shape I (1,2) containing the point. Returned shape is null if the VPoint is not on an edge of shape I (1,2).

◆ EdgeON() [1/2]

const TopoDS_Shape & TopOpeBRep_VPointInter::EdgeON ( const int I ) const

get the edge of shape I (1,2) containing the point.

◆ EdgeON() [2/2]

void TopOpeBRep_VPointInter::EdgeON	(	const TopoDS_Shape &	Eon,
		const double	Par,
		const int	I )

set the shape Eon of shape I (1,2) containing the point, and parameter <Par> of point on <Eon>.

◆ EdgeONParameter()

double TopOpeBRep_VPointInter::EdgeONParameter ( const int I ) const

get the parameter on edge of shape I (1,2) containing the point.

◆ EdgeParameter()

double TopOpeBRep_VPointInter::EdgeParameter ( const int I ) const

get the parameter on edge of shape I (1,2) containing the point

◆ EqualpP()

bool TopOpeBRep_VPointInter::EqualpP ( const TopOpeBRep_VPointInter & VP ) const

returns <True> if the 3d points and the parameters of the VPoints are same

◆ GetShapes()

void TopOpeBRep_VPointInter::GetShapes	(	int &	I1,
		int &	I2 ) const

◆ Index() [1/2]

int TopOpeBRep_VPointInter::Index ( ) const

◆ Index() [2/2]

void TopOpeBRep_VPointInter::Index ( const int I )

◆ IsInternal()

bool TopOpeBRep_VPointInter::IsInternal ( ) const

◆ IsMultiple()

bool TopOpeBRep_VPointInter::IsMultiple ( ) const

Returns True if the point belongs to several intersection lines.

◆ IsOnDomS1()

bool TopOpeBRep_VPointInter::IsOnDomS1 ( ) const

◆ IsOnDomS2()

bool TopOpeBRep_VPointInter::IsOnDomS2 ( ) const

◆ IsVertex()

bool TopOpeBRep_VPointInter::IsVertex ( const int I ) const

◆ IsVertexOnS1()

bool TopOpeBRep_VPointInter::IsVertexOnS1 ( ) const

Returns TRUE if the point is a vertex on the initial restriction facet of the first surface.

◆ IsVertexOnS2()

bool TopOpeBRep_VPointInter::IsVertexOnS2 ( ) const

Returns TRUE if the point is a vertex on the initial restriction facet of the second surface.

◆ Keep()

bool TopOpeBRep_VPointInter::Keep ( ) const

Returns value of myKeep (does not evaluate states) False at creation of VPoint. Updated by State(State from TopAbs,Integer from Standard).

◆ ParameterOnArc1()

double TopOpeBRep_VPointInter::ParameterOnArc1 ( ) const

◆ ParameterOnArc2()

double TopOpeBRep_VPointInter::ParameterOnArc2 ( ) const

◆ ParameterOnLine()

double TopOpeBRep_VPointInter::ParameterOnLine ( ) const

◆ ParametersOnS1()

void TopOpeBRep_VPointInter::ParametersOnS1	(	double &	u,
		double &	v ) const

◆ ParametersOnS2()

void TopOpeBRep_VPointInter::ParametersOnS2	(	double &	u,
		double &	v ) const

◆ ParonE()

bool TopOpeBRep_VPointInter::ParonE	(	const TopoDS_Edge &	E,
		double &	par ) const

returns <false> if the vpoint is not given on arc <E>, else returns <par> parameter on <E>

◆ PThePointOfIntersectionDummy()

TopOpeBRep_PThePointOfIntersection TopOpeBRep_VPointInter::PThePointOfIntersectionDummy ( ) const

◆ SetPoint()

void TopOpeBRep_VPointInter::SetPoint ( const IntPatch_Point & P )

◆ SetShapes()

void TopOpeBRep_VPointInter::SetShapes	(	const int	I1,
		const int	I2 )

◆ ShapeIndex() [1/2]

int TopOpeBRep_VPointInter::ShapeIndex ( ) const

returns value of filed myShapeIndex = 0,1,2,3 0 means the VPoint is on no restriction 1 means the VPoint is on the restriction 1 2 means the VPoint is on the restriction 2 3 means the VPoint is on the restrictions 1 and 2

◆ ShapeIndex() [2/2]

void TopOpeBRep_VPointInter::ShapeIndex ( const int I )

set value of shape supporting me (0,1,2,3).

◆ State() [1/2]

TopAbs_State TopOpeBRep_VPointInter::State ( const int I ) const

get state of VPoint within the domain of geometric shape domain (= 1 or 2).

◆ State() [2/2]

void TopOpeBRep_VPointInter::State	(	const TopAbs_State	S,
		const int	I )

Set the state of VPoint within the domain of the geometric shape (= 1 or 2).

◆ SurfaceParameters()

gp_Pnt2d TopOpeBRep_VPointInter::SurfaceParameters ( const int I ) const

get the parameter on surface of shape I (1,2) containing the point

◆ Tolerance()

double TopOpeBRep_VPointInter::Tolerance ( ) const

◆ TransitionLineArc1()

IntSurf_Transition TopOpeBRep_VPointInter::TransitionLineArc1 ( ) const

◆ TransitionLineArc2()

IntSurf_Transition TopOpeBRep_VPointInter::TransitionLineArc2 ( ) const

◆ TransitionOnS1()

IntSurf_Transition TopOpeBRep_VPointInter::TransitionOnS1 ( ) const

◆ TransitionOnS2()

IntSurf_Transition TopOpeBRep_VPointInter::TransitionOnS2 ( ) const

◆ UpdateKeep()

void TopOpeBRep_VPointInter::UpdateKeep ( )

set myKeep value according to current states.

◆ Value()

const gp_Pnt & TopOpeBRep_VPointInter::Value ( ) const

◆ Vertex()

const TopoDS_Shape & TopOpeBRep_VPointInter::Vertex ( const int I ) const

◆ VertexOnS1()

const TopoDS_Shape & TopOpeBRep_VPointInter::VertexOnS1 ( ) const

Returns the information about the point when it is on the domain of the first patch, i-e when the function IsVertexOnS1 returns True. Otherwise, an exception is raised.

◆ VertexOnS2()

const TopoDS_Shape & TopOpeBRep_VPointInter::VertexOnS2 ( ) const

Returns the information about the point when it is on the domain of the second patch, i-e when the function IsVertexOnS2 returns True. Otherwise, an exception is raised.

The documentation for this class was generated from the following file:

TopOpeBRep_VPointInter.hxx

Public Member Functions