Archived issue #0025478
Fillets can not touch
Description
When modeling existing parts, often fillets touch each other directly, meaning that there is no linear segment remaining, but they just have tangent (C1) point at which they touch.
When trying to apply those fillets OCCT thrown a standard_error with "BRep_API: command not done"
When trying to apply those fillets OCCT thrown a standard_error with "BRep_API: command not done"
Steps to reproduce
pload MODELING
box Box 10 10 10
explode Box E
blend Fillet Box 5 Box_1 5 Box_3
#tolerance ang : 0.01
#tolerance 3d : 0.0001
#tolerance 2d : 1.[revision removed]-05
#fleche : 0.001
#tolblend 0.01 0.0001 1.[revision removed]-05 0.001
#
#the variable Fillet is left unset
box Box 10 10 10
explode Box E
blend Fillet Box 5 Box_1 5 Box_3
#tolerance ang : 0.01
#tolerance 3d : 0.0001
#tolerance 2d : 1.[revision removed]-05
#fleche : 0.001
#tolblend 0.01 0.0001 1.[revision removed]-05 0.001
#
#the variable Fillet is left unset
Additional information
Public activity
3 archived notes
Participants are labeled by their role within this record.
#concave example
#generated by FreeCAD 0.15.4183 +7 (Git)
pload MODELING
box Box001 10 10 10
box Box002 10 10 12
ttranslate Box002 5 5 -1
bcut Cut Box001 Box002
explode Cut E
blend Fillet002 Cut 2.5 Cut_13 2.5 Cut_17 2.5 Cut_18
donly Fillet002
#generated by FreeCAD 0.15.4183 +7 (Git)
pload MODELING
box Box001 10 10 10
box Box002 10 10 12
ttranslate Box002 5 5 -1
bcut Cut Box001 Box002
explode Cut E
blend Fillet002 Cut 2.5 Cut_13 2.5 Cut_17 2.5 Cut_18
donly Fillet002
Problem described in issue is reproduced on current state of OCCT.